CIC Retrofit Installation LOG
#711
Now its CIC, I checked file size of CCC vs CIC and its many times larger. I seriously doubt it will ever finish on OBD interface, not worth the try given OBD interface speed is 1.4 KBPS as per my calculation, sometimes higher but not by much. I could be wrong in calculating speed but whatever it is, not good for CIC update.
#712
Contributors
Join Date: Nov 2005
Location: London, UK
Posts: 4,719
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: BMW E60 520d SE Saloon M47 2.0dTitanium Grey II, Grey−Dakota Leather, Visibility Package, Media Package, Through Load System, Lumbar support − fr seats, Automatic Air Conditioning−Advanced, High beam assistant, Hi−Fi Loudspeak
Model Year: 2006
Now its CIC, I checked file size of CCC vs CIC and its many times larger. I seriously doubt it will ever finish on OBD interface, not worth the try given OBD interface speed is 1.4 KBPS as per my calculation, sometimes higher but not by much. I could be wrong in calculating speed but whatever it is, not good for CIC update.
And yes unless your CIC has DAB inbuilt you will definately loose DAB.
#713
When I try to read my TCU (TCUM module) in NCS it just times out, says ecu not responding, however it responds back to INPA and Tool32, not sure what is wrong here. Has someone else seen this happening before?
Error in NCS is: COAPI-2020: no answer from ECU, IFH-009: ECU not conneted or doesn't answer
Error in NCS is: COAPI-2020: no answer from ECU, IFH-009: ECU not conneted or doesn't answer
#714
After a lot of struggle finally I upgraded my CIC to the v41 latest version. I didn't write UIF to avoid any mess up with the stored FSCs. Despite upgrading Assist MyInfo still not working. Menus are changed, Update Assist is gone it always says Assist Activated, there is no specific option to trigger message update. My Assist subscription end later this month and I won't be able to investigate this further. I will leave Assist investigation to the side and move on to combox media setup now.
For upgrade I used OPS interface, which I have rented for a week. No, please don't try with OBD, its suicidal, read my posts here for experience I have been thru. Anyone local wants this interface?
Everything else in my car is working happily.
For upgrade I used OPS interface, which I have rented for a week. No, please don't try with OBD, its suicidal, read my posts here for experience I have been thru. Anyone local wants this interface?
Everything else in my car is working happily.
#715
Selling a spare climate control unit http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330589981038&ssPageName=ADME:L:LCA:GB:1123#ht_500wt_1287 and Dension http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330589991563&ssPageName=ADME:L:LCA:GB:1123#ht_500wt_1287 incase anyone interested.
#716
If the switch to the automatic (and LCI) climate control is possible I am definitely interested in your control unit.
I am trying to find out what needs to be done to get the climate unit to work in my NON-LCI car.
My car is from 2005 and has manual climate control.
I am trying to find out what needs to be done to get the climate unit to work in my NON-LCI car.
My car is from 2005 and has manual climate control.
#717
Contributors
Join Date: Mar 2009
Location: Essex, UK.
Posts: 2,553
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 530 d M-sport e60
If you have the basic climate control, you can not fit the climate control advanced, the heater matrix is completely different with more air flap servos, a lot more pipe work, a secondary water pump and the control panel has three cable connections.
#719
Sorry i meant from the pre-lci to lci trim conversion. The total for the retrofit ranges from $3000-$3500. If you get the CIC, CID, and Controller package(programming included) from Patryk is $2750 without none of the lci wood trims and other parts that you have to get from Germany.
I have installed all the new parts and now I do not have any audio coming out of the speakers, even the seat belt beep isn't working. I know I am supposed to start looking into coding but this is my first time and i do not know where to start!!