E60 for Singaporeans
#6871
Senior Members
Join Date: May 2004
Location: eropagnis
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lmk' post='306924' date='Jul 5 2006, 10:09 AM
Zag and Tategoi,
http://www.caraudiomag.com/testreports/051...h990_head_unit/
this is what i meant and tell installers (especially those freaks out there) there is a big difference in sound reproduction between road and static tuning. As most installer tune the cabin with the car static, with this the rumble and hum does not affect the tuning at all. Once you set on the road, the rumbles and hums from tire noise will surface. This resonates and cancels low frequencies. Therefore it will not be accurate in drive mode.
Alpine F1 came out with this automatic tuning with both static and road!!!! my dream comes true finally.
Also, to alot of installers who lacks the knowledge of electronics engineering, they simply ignore the distortion at low freqs. As most of the specs are at 14.4volts and not 12 volts, the distortion is at its best at 12V! When the car engine is running, the voltage goes back up to 14.4V. Therefore tuning needs alot of skills and trial and error. Alpine F1 takes care of that in Auto mode.
Hmm...if i can, slam in the F1 head unit, control unit with my dream amp and speakers (not Alpine) that will be cool!
http://www.caraudiomag.com/testreports/051...h990_head_unit/
this is what i meant and tell installers (especially those freaks out there) there is a big difference in sound reproduction between road and static tuning. As most installer tune the cabin with the car static, with this the rumble and hum does not affect the tuning at all. Once you set on the road, the rumbles and hums from tire noise will surface. This resonates and cancels low frequencies. Therefore it will not be accurate in drive mode.
Alpine F1 came out with this automatic tuning with both static and road!!!! my dream comes true finally.
Also, to alot of installers who lacks the knowledge of electronics engineering, they simply ignore the distortion at low freqs. As most of the specs are at 14.4volts and not 12 volts, the distortion is at its best at 12V! When the car engine is running, the voltage goes back up to 14.4V. Therefore tuning needs alot of skills and trial and error. Alpine F1 takes care of that in Auto mode.
Hmm...if i can, slam in the F1 head unit, control unit with my dream amp and speakers (not Alpine) that will be cool!
I had a Alpine 7998 head unit in my previous ride. Although it is not in the like of F1, but the quality of the source is much better than our original head unit. Although Swift said the 701 helps, I don't agree with him.
#6872
Senior Members
Join Date: May 2004
Location: eropagnis
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tcc39' post='306942' date='Jul 5 2006, 11:14 AM
I think they have both device and treatment.
http://www.nanoaq.com/content.php?item=iogenic
This sales guy keep recommending me this product. I heard the device is $150.
Shall find out more.
http://www.nanoaq.com/content.php?item=iogenic
This sales guy keep recommending me this product. I heard the device is $150.
Shall find out more.
#6873
Senior Members
Join Date: May 2004
Location: eropagnis
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lmk' post='306969' date='Jul 5 2006, 01:23 PM
oooooooooh!....i want it! i want it! can i choose my own amp please!!!!!!
i would throw away the head unit in my ride and reserve the space for F1!
i will be happy to go Luxman amp, CV subs, and MB quart components to match with ADS components.
shall we group buy F1? who game?
i would throw away the head unit in my ride and reserve the space for F1!
i will be happy to go Luxman amp, CV subs, and MB quart components to match with ADS components.
shall we group buy F1? who game?
#6874
Originally Posted by tategoi' post='306972' date='Jul 5 2006, 01:32 PM
How to throw away our stock head unit? But I saw someone installed a separate head unit in the e60, with additional speakers and subwoofers at new location without taking out stock speakers. You can't control the new ICE on the steering wheel, but you can still hear car and PDC warning from existing speakers.
i am looking for the configration of our E60 wiring that controls the electronics. So that when we use after market head unit like this, we can still use our steering controls.
#6875
Originally Posted by tategoi' post='306970' date='Jul 5 2006, 01:25 PM
Thats why you need to have a voltage stabilizer to feed your audio system with constant power. My dream of having an Alpine F1 was dashed when C&C refused to sell me an R32 with free reverse sensor.
I had a Alpine 7998 head unit in my previous ride. Although it is not in the like of F1, but the quality of the source is much better than our original head unit. Although Swift said the 701 helps, I don't agree with him.
I had a Alpine 7998 head unit in my previous ride. Although it is not in the like of F1, but the quality of the source is much better than our original head unit. Although Swift said the 701 helps, I don't agree with him.
in fact, has been a supporter of Alpine head unit since the 80's.
Before that, i am a nakamichi fan when cassette tape is the norm, i still have the Dragon sitting somewhere in my store room.
F1 is the way to go, maybe i will just hide it under the console.
#6876
Senior Members
Join Date: Jun 2005
Location: singapore
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RSLK' post='306914' date='Jul 5 2006, 09:11 AM
Meng... you drive a LHD E60 in Singapore???
#6877
Senior Members
Join Date: Mar 2006
Location: Singapore
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: E39 525i, E60 530i, F10
Originally Posted by tcc39' post='306942' date='Jul 5 2006, 11:14 AM
I think they have both device and treatment.
http://www.nanoaq.com/content.php?item=iogenic
This sales guy keep recommending me this product. I heard the device is $150.
Shall find out more.
http://www.nanoaq.com/content.php?item=iogenic
This sales guy keep recommending me this product. I heard the device is $150.
Shall find out more.
#6878
Senior Members
Join Date: Jun 2005
Location: singapore
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
anyone replace windscreen at pml before? i got a chip from driving on the ecp today. my insurance should cover it. my agent says no payment needed on my end.. just send in to pml. how does this work? do i have to pay 1st and claim?
#6879
Members
Join Date: Jun 2006
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 630i, H&R Springs, PSS9 coming, H&R ARBs, Sprint Booster, Eisenmann Quad, HAMANN Pedals, M6 Rims/Advan Sports...
hi Edd
I thought it was in the Business news already, that C&Cars will lose their dealership with VW. About bloody time la.. their follow up, sibeh jialat lor...
Anyway.. thanks for the info!
I thought it was in the Business news already, that C&Cars will lose their dealership with VW. About bloody time la.. their follow up, sibeh jialat lor...
Anyway.. thanks for the info!
#6880
Originally Posted by bugaboo' post='306984' date='Jul 5 2006, 02:40 PM
anyone replace windscreen at pml before? i got a chip from driving on the ecp today. my insurance should cover it. my agent says no payment needed on my end.. just send in to pml. how does this work? do i have to pay 1st and claim?