Pre LCI Halogen to LCI Halogen conversion
#331
Thread Starter
Contributors
Joined: Aug 2008
Posts: 293
Likes: 0
From: Belgium (EU)
My Ride: 520i ('04)
Now that i have a little time to spare i refitted the 5W LED's (i removed them after they throw iDrive errors) and coded LMA not to do the warm and coldcheck and the error is gonne.
Still have the issue that the HID's blink 3 times when i turn them on with the engine running, although i've coded LMA not to do the check.
No blinking when i set the lightswitch on auto nor when i switch the lights on (or set the switch to auto) before starting the car.
If i add $522 (Xenon) to the VO and code the car, the blinking is gonne.
But now the car thinks it has autoleveling, disabling the manual leveling switch in the car and starts to point the lights at random heights when i turn them on.
The car is starting to give me headache...
Still have the issue that the HID's blink 3 times when i turn them on with the engine running, although i've coded LMA not to do the check.
No blinking when i set the lightswitch on auto nor when i switch the lights on (or set the switch to auto) before starting the car.
If i add $522 (Xenon) to the VO and code the car, the blinking is gonne.
But now the car thinks it has autoleveling, disabling the manual leveling switch in the car and starts to point the lights at random heights when i turn them on.
Code:
Generated with NCS Dummy version 0.5.0.0 ? copyright İ 2011 revtor software Output : Trace Differences Chassis : E60 (E60,E61,E63,E64) Module : LM_E60.C0E Trace file 1 : ...\NCS Expert\TRC Xenon\LMA_FSW_PSW.TRC" (FSW/PSW) Trace file 2 : ...\NCS Expert\Original TRC\LMA_FSW_PSW.TRC" (FSW/PSW) Differences : Yes 1 2 FUNCTION KEYWORD FUNCTION KEYWORD TRANSLATION PARAMETER KEYWORD PARAMETER KEYWORD TRANSLATION ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ KALTUEBERWACHUNG_SL_V_R COLD MONITORING PARKING LIGHT OR ANGEL EYE - FRONT RIGHT * aktiv active * nicht_aktiv not active KALTUEBERWACHUNG_SL_V_L COLD MONITORING PARKING LIGHT OR ANGEL EYE - FRONT LEFT * aktiv active * nicht_aktiv not active KALTUEBERWACHUNG_AL_R COLD MONITORING RIGHT LOW BEAM * nicht_aktiv not active * aktiv active KALTUEBERWACHUNG_AL_L COLD MONITORING LEFT LOW BEAM * nicht_aktiv not active * aktiv active KALTUEBERW_RL_BL_2_R * nicht_aktiv not active * aktiv active KALTUEBERW_RL_BL_2_L * nicht_aktiv not active * aktiv active WARMUEBERWACHUNG_SL_V_R HOT MONITORING PARKING LIGHT OR ANGEL EYE - FRONT RIGHT * aktiv active * nicht_aktiv not active WARMUEBERWACHUNG_SL_V_L HOT MONITORING PARKING LIGHT OR ANGEL EYE - FRONT LEFT * aktiv active * nicht_aktiv not active WARMUEBERW_RL_BL_2_R * nicht_aktiv not active * aktiv active WARMUEBERW_RL_BL_2_L * nicht_aktiv not active * aktiv active FEHLERMELDUNG_CC_SL_V_R CHECK CONTROL (CC) FRONT RIGHT PARKING LIGHT FAILURE * aktiv active * nicht_aktiv not active FEHLERMELDUNG_CC_SL_V_L CHECK CONTROL (CC) FRONT LEFT PARKING LIGHT FAILURE * aktiv active * nicht_aktiv not active FEHLERMELD_CC_RL_BL_2_R * nicht_aktiv not active * aktiv active FEHLERMELD_CC_RL_BL_2_L * nicht_aktiv not active * aktiv active RL_BL_2_ALS_SL_VORNE * nicht_aktiv not active * aktiv active HEIMLEUCHTEN_KL58G FOLLOW-ME-HOME - INTERIOR LIGHTING * nicht_aktiv not active * aktiv active COMFORT_ACCESS_LICHT * aktiv active * nicht_aktiv not active XENON_WIEDER_ZUEND * aktiv active * nicht_aktiv not active BI_XENON_VERBAUT BI-XENON HEADLIGHTS INSTALLED * aktiv active * nicht_aktiv not active XENON_AL_VERBAUT XENON LOW BEAMS INSTALLED * aktiv active * nicht_aktiv not active HERSTELLER_PARAMETER_0 * wert_02 value 02 * wert_01 value 01 QUITT_BLK_ZU_CHECK * aktiv active * nicht_aktiv not active PWM_ANSTEUERUNG_AL LOW BEAM PLUG * wert_01 value 01 * wert_03 value 03 PWM_ANSTEUERUNG_SL_V * wert_03 value 03 * wert_04 value 04 PWM_ANSTEUERUNG_RL_BL_2 * wert_02 value 02 * wert_01 value 01 DUAL_SP__AL_R * nicht_aktiv not active * aktiv active DUAL_SP__AL_L * nicht_aktiv not active * aktiv active AL_KL50_SCHUTZ * nicht_aktiv not active * aktiv active PWM_ANST_RL_BL_2_AL * wert_03 value 03 * wert_02 value 02 PWM_ANST_RL_BL_2_FL * wert_03 value 03 * wert_02 value 02 RL_BL_2_PO_RL_FKT * nicht_aktiv not active * aktiv active RL_BL_2_PARKL_FKT * nicht_aktiv not active * aktiv active LWR_SCHRITTE_STELLUNG_0 * wert_01 value 01 * wert_02 value 02 LWR_SCHRITTE_STELLUNG_2 * wert_02 value 02 * wert_03 value 03 LWR_ABS_MIN_STELLUNG_2 * wert_02 value 02 * wert_01 value 01 LWR_HYSTERESE_START * wert_02 value 02 * wert_01 value 01 LWR_VORBESTROMUNG * wert_02 value 02 * wert_01 value 01 AUSWERT_GRADIENT TRAILER GRADIENT * aktiv active * nicht_aktiv not active AUSWERT_PROP_ABWEICHUNG * aktiv active * nicht_aktiv not active LEUCHTWEITENREG_DYNAM_0E * aktiv active * nicht_aktiv not active LEUCHTWEITENREG_AUTOM_0E * aktiv active * nicht_aktiv not active VMIN_BREMSEN * wert_02 value 02 * wert_01 value 01
#332
Thread Starter
Contributors
Joined: Aug 2008
Posts: 293
Likes: 0
From: Belgium (EU)
My Ride: 520i ('04)
I have just been for a 30 min drive and the angel eyes are blinking again. I haven't tried turning off the bulb checks yet, but I managed to get a video of the lights:
...I would like to add that both headlights do in fact blink at different times at similar intervals. (It must have been a coincidence last time as I'm positive they weren't doing this before)
...I would like to add that both headlights do in fact blink at different times at similar intervals. (It must have been a coincidence last time as I'm positive they weren't doing this before)
It's like everyone has his own faults and iDrive errors. It's starts to freak me out...
#333
I have ventilated the housings with holes and painted the chrome with matt black paint. The lights still have the blinking problem after being on for a while, so I took the bulb cover off and felt around the bulb - they barely even feel warm? (it sounds safe to rule out the heat issue)
I have since turned off the cold & warm bulb checks but I haven't had chance to check for the blinking again yet...
I have since turned off the cold & warm bulb checks but I haven't had chance to check for the blinking again yet...
#336
...I've had many occasions to check if they are still blinking after driving, but I keep forgetting lol.
#337
I can confirm that even with the parking light bulb checks off, I still have the blinking leds after a short drive!
It's getting quite boring now. I wonder if the resistor is causing the problem??
I might try removing the resistor completely first as I haven't tried the leds without them yet. I know coding didn't stop the errors with my halogen bulbs, but if it worked on the leds for Sas, maybe it will work for me too. (although I remember Sas had no errors with his halogens to begin with)
...failing that, I could incorporate a relay - mentioned earlier in this thread.
It's getting quite boring now. I wonder if the resistor is causing the problem??
I might try removing the resistor completely first as I haven't tried the leds without them yet. I know coding didn't stop the errors with my halogen bulbs, but if it worked on the leds for Sas, maybe it will work for me too. (although I remember Sas had no errors with his halogens to begin with)
...failing that, I could incorporate a relay - mentioned earlier in this thread.
#338
When you add $522 to the VO, did this also stop the errors from the led bulbs - or did you still have to disable bulb checks?
#339
Thread Starter
Contributors
Joined: Aug 2008
Posts: 293
Likes: 0
From: Belgium (EU)
My Ride: 520i ('04)
#340
So I just want to chime in and add this. I recently made a conversion cable for Justin (jg525i) and I did the same thing as I had done before and soldered wire 4 and 5 together for the angel eyes. As expected, the cable works flawlessly with stock AE bulb, and no error.
Those that have error should probably just check their wiring.
Those that have error should probably just check their wiring.