Tailgate wiring harness replacement??
#161
![Default](https://5series.net/forums/images/icons/icon1.gif)
Thanks for all the superb advice on this problem. I have fixed the heated rear screen today and the experience of other was invaluable. Here's what I found when I opened things up.
The brown cable was burned through and had also burned the rear wash tube. There was water in the cavity above the headliner. The wire was easy, cut and solder in a new section. I say easy, but I had to cut about 30mm of cable out - copper oxide doesn't solder too well. I left the coax cable alone as I didn't want to cut into an unknown and find I couldn't repair it. If anyone has done this, I'd be interested in what you found.
The water tube took a little more thought. I finished up using connectors and pipe from a garden irregation kit - Hozelok I think - to replace the burned section, finishing them off with self-amalgamating tape.
The reassembly was fiddly, but OK. Make sure that you have pulled enough cable through before bolting everything back down.
Someone had questioned the strength of the spring in the glass hinge - it can be held with one finger.
Question is now how long will it be before I have to do more.
There are some photos posted here
Thanks again for all the info.
The brown cable was burned through and had also burned the rear wash tube. There was water in the cavity above the headliner. The wire was easy, cut and solder in a new section. I say easy, but I had to cut about 30mm of cable out - copper oxide doesn't solder too well. I left the coax cable alone as I didn't want to cut into an unknown and find I couldn't repair it. If anyone has done this, I'd be interested in what you found.
The water tube took a little more thought. I finished up using connectors and pipe from a garden irregation kit - Hozelok I think - to replace the burned section, finishing them off with self-amalgamating tape.
The reassembly was fiddly, but OK. Make sure that you have pulled enough cable through before bolting everything back down.
Someone had questioned the strength of the spring in the glass hinge - it can be held with one finger.
Question is now how long will it be before I have to do more.
There are some photos posted here
Thanks again for all the info.
#162
New Members
Join Date: Nov 2012
Location: Stockholm
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW E61 Touring
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hi!
I have a 2007 E61 LCI with 110 000 k's on it. I'm having trouble with my tailgate glass heater, it does not work! Heating of side mirrors do. And I've checked the fuses. Of cource, I suspect this is the first issue popping up regarding these faulty wiring.
I've read through this entire thread, I've found plenty of helpful tips, images and guides. However, I don't know exactly how to re-connect the wires after cutting them off. Is it recommendet to extend them or is there enough wire to just re-connect them? Is it just to twist the ends of the copper wiring and put some electrical tape around?
Any tips, images or links regarding this would be appreciated.
Regards, Fredrik
I have a 2007 E61 LCI with 110 000 k's on it. I'm having trouble with my tailgate glass heater, it does not work! Heating of side mirrors do. And I've checked the fuses. Of cource, I suspect this is the first issue popping up regarding these faulty wiring.
I've read through this entire thread, I've found plenty of helpful tips, images and guides. However, I don't know exactly how to re-connect the wires after cutting them off. Is it recommendet to extend them or is there enough wire to just re-connect them? Is it just to twist the ends of the copper wiring and put some electrical tape around?
Any tips, images or links regarding this would be appreciated.
Regards, Fredrik
#163
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hello all, would I be right in thinking that the wiring for the drivers side reversing light comes through the same side boot hinge wiring loom? I have checked with an electrical tester, and there is no current to drivers side light, but fine to passenger side.
#164
New Members
Join Date: Oct 2012
Location: Sweden
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 523 Touring 2006, 328 Coupé 1999
#165
New Members
Join Date: Jun 2012
Location: Memphis TN USA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2007 BMW 530Xi touring
Silver Grey Met / Black Dakota Leather
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hey All, if it makes you feel better about this tailgate wiring problem, MERCEDES W124 300TE wagons do exactly the same thing,, been here and done this before on my 1993 Mercedes but it was 20 years old with 250000 miles before I had to. But the BMW E61 is worth it!
#166
Members
Join Date: Jul 2012
Location: Manchester, england
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 525d M-sport,19" staggered style 95 wheels,custom quad exhaust with modified reiger rear bumper insert,LCI front and rear lights,stage 2 custom remap, DPF removed, cat removed
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hi!
I have a 2007 E61 LCI with 110 000 k's on it. I'm having trouble with my tailgate glass heater, it does not work! Heating of side mirrors do. And I've checked the fuses. Of cource, I suspect this is the first issue popping up regarding these faulty wiring.
I've read through this entire thread, I've found plenty of helpful tips, images and guides. However, I don't know exactly how to re-connect the wires after cutting them off. Is it recommendet to extend them or is there enough wire to just re-connect them? Is it just to twist the ends of the copper wiring and put some electrical tape around?
Any tips, images or links regarding this would be appreciated.
Regards, Fredrik
I have a 2007 E61 LCI with 110 000 k's on it. I'm having trouble with my tailgate glass heater, it does not work! Heating of side mirrors do. And I've checked the fuses. Of cource, I suspect this is the first issue popping up regarding these faulty wiring.
I've read through this entire thread, I've found plenty of helpful tips, images and guides. However, I don't know exactly how to re-connect the wires after cutting them off. Is it recommendet to extend them or is there enough wire to just re-connect them? Is it just to twist the ends of the copper wiring and put some electrical tape around?
Any tips, images or links regarding this would be appreciated.
Regards, Fredrik
#167
Members
Join Date: Jul 2012
Location: Manchester, england
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 525d M-sport,19" staggered style 95 wheels,custom quad exhaust with modified reiger rear bumper insert,LCI front and rear lights,stage 2 custom remap, DPF removed, cat removed
![Default](https://5series.net/forums/images/icons/icon1.gif)
I have the problem of number plate lights and O/S(right) rear side light going off only when the tailgate is open.
Just to save me a bit of time are all the wires for these lights in the left hinge?
Just to save me a bit of time are all the wires for these lights in the left hinge?
#168
![Default](https://5series.net/forums/images/icons/icon1.gif)
Reverse lights and number plate light are in right side ( drivers side). Rear defroster wire is in left side along with left hand side wires for left hand side lights. Just replaced rhs in our 525. All cables in loom were broken.
#169
![Default](https://5series.net/forums/images/icons/icon1.gif)
The previous post raises an interesting angle that I don't think had been discussed in this thread. Does anyone know if the wiring to the various tailgate components is the same for cars with right-hand versus left-drive?
#170
![Default](https://5series.net/forums/images/icons/icon1.gif)
does anyone know what is controlled/connected to the left hand ribbon plug (pink/purple one)on the diversity module? Mine appears to be broken but got plenty of probs one being water damage to the diversity unit ![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
If i replace the diversity unit what won't work because of the broken wires. The black one is for the remote ariel as far as i understand what does the pink do?
thanks James
![Frown](https://5series.net/forums/images/smilies/imported/sad.gif)
If i replace the diversity unit what won't work because of the broken wires. The black one is for the remote ariel as far as i understand what does the pink do?
thanks James