Pre LCI Halogen to LCI Halogen conversion
#161
Members
Join Date: Aug 2010
Location: Orlando, Fl
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: '04 530i 6MT
'04 Audi S4 6MT
#162
Members
Join Date: Aug 2010
Location: Orlando, Fl
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: '04 530i 6MT
'04 Audi S4 6MT
![Default](https://5series.net/forums/images/icons/icon1.gif)
B6S4 thanks I will go out this afternoon and get 2, i am so sure you are spot on with this as I had to go out this morning and it was quite cold I had the error this time front RIGHT without touching the brakes and it happened 4 or 5 times, then as it warmed by a couple of degrees it stopped, i am sure i read that cold weather affects the resistance, or am I being stupid ???
jas_r_1 no problem saves you pulling your lights out again and at least we will know if it works, but I am really sure B6S4 is spot on.
jas_r_1 no problem saves you pulling your lights out again and at least we will know if it works, but I am really sure B6S4 is spot on.
This is correct, as the wires become colder, resistance drops, so hopefully we are on the right track here.
#163
Members
Join Date: Aug 2010
Location: Orlando, Fl
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: '04 530i 6MT
'04 Audi S4 6MT
![Default](https://5series.net/forums/images/icons/icon1.gif)
I'm wondering if the earlier LCM's are different from the later ones. From what I understand, the OEM LCI retrofit only works for later built cars. Out of curiosity, what years are your cars Livefour2day and Jas_r_1?
#164
Senior Members
Join Date: Apr 2009
Location: London
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 520d - 19" 172s- Remapped - LCI taillights V6 cables - LCI xenon headlights - Denison 500 with BTA1500 - led interior lights - OEM led number plate lights
Planned mods:
Folding mirrors - Modmynav kit - High gloss shadowline trim -
![Default](https://5series.net/forums/images/icons/icon1.gif)
IIRC cars built after 2005 don't need a new LCM for the proper LCI retrofit but just need programming
#165
Members
Join Date: Aug 2009
Location: Cirencester UK
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 520d M Sport
Titanium Silver
Retro fit's -
Professional Sat Nav
Footwell Lights
BMW Bluetooth
LCI Halogens with HID
![Default](https://5series.net/forums/images/icons/icon1.gif)
Guys could only get a 15ohm 10watt hope this will be ok the guy in the shop said they don't do a 14.5ohm its dark and cold here now, so I am going to do this tomorrow.
jas_r_1 I have 4 of them so if this works don't buy them I will post you the other two.
B6S4 once again even if this doesn't work thank you for your help,
My car build year is 2006,I think June and I have not fitted the LCI rear lights they are still Pre LCI.
hope this is the correct resistor ...
jas_r_1 I have 4 of them so if this works don't buy them I will post you the other two.
B6S4 once again even if this doesn't work thank you for your help,
My car build year is 2006,I think June and I have not fitted the LCI rear lights they are still Pre LCI.
hope this is the correct resistor ...
![](http://www.maitlandonline.co.uk/res.jpg)
#166
Senior Members
Join Date: Apr 2009
Location: London
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 520d - 19" 172s- Remapped - LCI taillights V6 cables - LCI xenon headlights - Denison 500 with BTA1500 - led interior lights - OEM led number plate lights
Planned mods:
Folding mirrors - Modmynav kit - High gloss shadowline trim -
![Default](https://5series.net/forums/images/icons/icon1.gif)
"jas_r_1 I have 4 of them so if this works don't buy them I will post you the other two."
Thanks. Fingers crossed it works.
Thanks. Fingers crossed it works.
#167
Members
Join Date: Aug 2009
Location: Cirencester UK
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 520d M Sport
Titanium Silver
Retro fit's -
Professional Sat Nav
Footwell Lights
BMW Bluetooth
LCI Halogens with HID
![Default](https://5series.net/forums/images/icons/icon1.gif)
B6S4
you are the man
It works perfectly put the resistors in line at the point on the loom where the two AE wires become one.
Just took it for a drive its also cold outside today, sat there with the brakes on for a good 10 mins nothing put it in reverse and held the car with the brakes on nothing.
I am going out again now with the wife so got the chance to give it another test, but I have to say I think B6S4 has found the solution.
just to recap I bought 15ohm / 10watt resistors and wired them in line at the point on the new loom that the two AE wires become one so one end of the resistor it has the two AE wires and the other end it has the one AE wire
jas_r_1 if you PM your address I will post you the two resistors I have left over.
B6S4 thank you for your help on this, I think there will be loads of people on this Forum who will be gratefull that this now works.
![Worthy](https://5series.net/forums/images/smilies/imported/worthy.gif)
It works perfectly put the resistors in line at the point on the loom where the two AE wires become one.
Just took it for a drive its also cold outside today, sat there with the brakes on for a good 10 mins nothing put it in reverse and held the car with the brakes on nothing.
I am going out again now with the wife so got the chance to give it another test, but I have to say I think B6S4 has found the solution.
![Hyper](https://5series.net/forums/images/smilies/imported/hyper.gif)
just to recap I bought 15ohm / 10watt resistors and wired them in line at the point on the new loom that the two AE wires become one so one end of the resistor it has the two AE wires and the other end it has the one AE wire
jas_r_1 if you PM your address I will post you the two resistors I have left over.
B6S4 thank you for your help on this, I think there will be loads of people on this Forum who will be gratefull that this now works.
![Twoup](https://5series.net/forums/images/smilies/imported/twoup.gif)
#168
Senior Members
Join Date: Aug 2008
Location: Huddersfield,W.York's
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://5series.net/forums/images/icons/icon1.gif)
Nice,a great thank's to B6S4 for giving the boy's an indication as to what the problem would be,i've been keeping an eye on this post daily,let's see a final cable produced error free for forum member's(mine are pre-lci adaptive xenon's) and I need a cable for pre-lci adaptive>lci-adaptive xenon's!
![Twoup](https://5series.net/forums/images/smilies/imported/twoup.gif)
#169
Senior Members
Join Date: Apr 2009
Location: London
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 520d - 19" 172s- Remapped - LCI taillights V6 cables - LCI xenon headlights - Denison 500 with BTA1500 - led interior lights - OEM led number plate lights
Planned mods:
Folding mirrors - Modmynav kit - High gloss shadowline trim -
![Default](https://5series.net/forums/images/icons/icon1.gif)
B6S4
you are the man
It works perfectly put the resistors in line at the point on the loom where the two AE wires become one.
Just took it for a drive its also cold outside today, sat there with the brakes on for a good 10 mins nothing put it in reverse and held the car with the brakes on nothing.
I am going out again now with the wife so got the chance to give it another test, but I have to say I think B6S4 has found the solution.
just to recap I bought 15ohm / 10watt resistors and wired them in line at the point on the new loom that the two AE wires become one so one end of the resistor it has the two AE wires and the other end it has the one AE wire
jas_r_1 if you PM your address I will post you the two resistors I have left over.
B6S4 thank you for your help on this, I think there will be loads of people on this Forum who will be gratefull that this now works.![Twoup](https://5series.net/forums/images/smilies/imported/twoup.gif)
![Worthy](https://5series.net/forums/images/smilies/imported/worthy.gif)
It works perfectly put the resistors in line at the point on the loom where the two AE wires become one.
Just took it for a drive its also cold outside today, sat there with the brakes on for a good 10 mins nothing put it in reverse and held the car with the brakes on nothing.
I am going out again now with the wife so got the chance to give it another test, but I have to say I think B6S4 has found the solution.
![Hyper](https://5series.net/forums/images/smilies/imported/hyper.gif)
just to recap I bought 15ohm / 10watt resistors and wired them in line at the point on the new loom that the two AE wires become one so one end of the resistor it has the two AE wires and the other end it has the one AE wire
jas_r_1 if you PM your address I will post you the two resistors I have left over.
B6S4 thank you for your help on this, I think there will be loads of people on this Forum who will be gratefull that this now works.
![Twoup](https://5series.net/forums/images/smilies/imported/twoup.gif)
I'll pm you my address and big thanks to you as well.
Where did you place the resistors? From what I read they can get quite hot so it's bot recommended to put near plastic. But that could be in relation to higher watt and higher ohm resistors.
Also, did you tap the resistor into the two wires before they join into one or the single wire after the two wires are joined?
#170
![Default](https://5series.net/forums/images/icons/icon1.gif)
All I can say is:
Respect to BS64
![Worthy](https://5series.net/forums/images/smilies/imported/worthy.gif)
And a big thanks to Sas for making the cables. Thank you also to the UK guys on here who've really stayed on top of this to make it work.
![Worthy](https://5series.net/forums/images/smilies/imported/worthy.gif)
![Worthy](https://5series.net/forums/images/smilies/imported/worthy.gif)
![Worthy](https://5series.net/forums/images/smilies/imported/worthy.gif)
![Worthy](https://5series.net/forums/images/smilies/imported/worthy.gif)
And a big thanks to Sas for making the cables. Thank you also to the UK guys on here who've really stayed on top of this to make it work.
![Twoup](https://5series.net/forums/images/smilies/imported/twoup.gif)