zadel

hi hatemax, can you explain further more about the mp3 programming, I was so excited to get the dension but now I'm afraid it won't work.
and another question is I also noticed that you didn't install the dension bluetooth module, do you think I have to do programming for that too ?

I have a 2004 e60 with M-ask and no mp3.
thanks

sd_dracula

If you don't already bluetooth yes you will need to code it in, if you don't have cd changer or mp3 enabled you will need to code the dension also, as I did.
But if you're close to an autologic machine it can code both dension + bluetooth at the same time, in about 5 mins and its the easiest thing to do.

zadel

I have a cd changer and I have a built-in bluetooth phone in my car, sadly no autologic machine so I was thinking about buying a inpa cable and code it using NCSexpert, the only problem is that I'm not sure how exactly can I do the coding without screwing up anything else.

sd_dracula

If you're lucky it might just work without any coding. You have to simply check.
Connect them up and see (if you want to use the blueooth on the dension you must disconnect the factory one, its in the boot above the rear right wheel arch).