OakTone

A steal at [SOLD] for the set, with hardware. See diagram below. All bought new from FCP Euro, unboxed but never installed.

Meant to refresh the rear suspension on my 2006 550i (minus strut assemblies; already replaced) after doing the front, but never got around to the project and don't own the car anymore. See below for list of individual parts. Basically all rear control/guide arms/links/wishbones, swing arm ball joints and bushings, eccentric bolts/washers. I picked the best balance of value and quality (TRW for most expensive parts, Lemforder/BMW OEM for the rest).

Total cost $400+ new. Prefer to sell the whole set to an enthusiast doing a refresh/rebuild ($200 + economy shipping or free local pickup in SF Bay Area) vs. listing parts on eBay, but will consider offers for individual components. All parts verified to fit E60 550i; should fit most/all E60 5 Series models 2004-2010, I believe E61 Touring as well, E63/64 6 Series. Some parts also even E39 or E65/66. Please verify by part number!

- Control Arm/Wishbone (R) 33322347990 (TRW JTC1121) with nut
- Control Arm/Wishbone (L) 33322347991 (TRW JTC1122) with nut
- Guide Link/Control Arm (x2) 33326777424 (TRW JTC1066) with nut
- Integral Link (x2) 33326770749 Lemforder
- Rear Ball Joint (x2) 33326767748 Lemforder, with snap ring
- Swing Arm Bushing (x2) Front - Lemforder 3493301
- Swing Arm Bushing (x2) Rear - Lemforder 3493401
- Eccentric Bolt Rear Upper (x2) - BMW 33306760591
- Eccentric Flat Washer (x2) - BMW 33306760592

PM with any questions. Thanks for reading!