Illuminated door sills
04-11-2021, 10:37 AM
#11
New Members
Join Date: Jan 2021
Location: Winchester
Posts: 2
Received 0 Likes
on
0 Posts
My Ride: F11 535iSE
Illuminated Sills
I tinkered around today & I managed to get the illuminated sills working. I connected the GROUND & the POWER wires for all 4 sills using, for each, a 5-block Wago connector (Wago 221-415; https://amzn.to/3sfKT6U). I then connected the GROUND Wago connector to a screw on the body, & used the POWER Wago connector in conjunction with a piggy-back fuse (5A) & connected it to fuse no. 32 underneath the glove-box. They all work!
My plan is to connect the GROUND & the POWER from the rear to the front sills using 2 separate Wago connectors, or maybe I should use Scotch Lock T Tap connections (https://bit.ly/3uUVPZp)...???
My burning question is: How do I get both GROUND & POWER cables from the driver side to the passenger side? Easiest way would be from driver's side footwell to passenger side footwell. Would this be possible?
My plan is to connect the GROUND & the POWER from the rear to the front sills using 2 separate Wago connectors, or maybe I should use Scotch Lock T Tap connections (https://bit.ly/3uUVPZp)...???
My burning question is: How do I get both GROUND & POWER cables from the driver side to the passenger side? Easiest way would be from driver's side footwell to passenger side footwell. Would this be possible?
Thread
Thread Starter
Forum
Replies
Last Post