ECU Reflashed
#11
Former Vendor
Thread Starter
Join Date: Dec 2007
Location: Anaheim, CA
Posts: 3,624
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F10 M5
Model Year: 2013
Originally Posted by NPe' post='517790' date='Jan 14 2008, 10:26 AM
Skimming through old issues of Auto Motor & Sport.
When tested, a loss of about 13% was measured. The comment was "On the limit of acceptable for a rwd with lock up"
The question is then. Did your tranny lock up during dyno?
When tested, a loss of about 13% was measured. The comment was "On the limit of acceptable for a rwd with lock up"
The question is then. Did your tranny lock up during dyno?
Can you explain lock up? Now I'm worried.
#12
Members
Join Date: Dec 2007
Location: Sweden
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: M6 E63 Sapphire black
Z3 Coupe R4Turbo Hellrot, semi race. (670bhp)
Z3 Coupe V8Turbo design work ongoing, full race.
Sold: 545i Titanium Silver
The system is a Lock-up clutch provided for locking up the output shaft of the torque converter to the output shaft of the engine in specific conditions.
Meaning, no loses in torque converter.
If the tranny didn?t lock up, the torque converter would slip, and turn some crank power % into heat.
Meaning, no loses in torque converter.
If the tranny didn?t lock up, the torque converter would slip, and turn some crank power % into heat.
#13
Former Vendor
Thread Starter
Join Date: Dec 2007
Location: Anaheim, CA
Posts: 3,624
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F10 M5
Model Year: 2013
Well...I really don't think it locked on the dyno. I will get everyone a better picture this Friday once everything is in.
Thread
Thread Starter
Forum
Replies
Last Post