E60 comfort seats mod (simulator install)
#21
New Members
In the last diagram I posted it shows that on that large yellow connector, x275:
- Pin 2 goes to the center console module's pin 3 and to the button panel on the side of the seat (pin 3)
- Pin 3 goes to +12 volts on one end and pin 2 of the button panel on the side of the seat
- Pin 11 goes to ground on one end and pin 1 of the button panel
- Pin 23 goes somewhere (not shown on here) and to pin 4 on the button panel on the side of the seat
- Pins 5, 7, 9, 10, 21, and 22 go to the B pillar safety module on one end and various components on the seat for the other end, like seat belt switch, head restraint pretensioner, occupancy detection mat, etc.
- Pins 13 and 14 are for the non-comfort seats I believe
Thread
Thread Starter
Forum
Replies
Last Post
BallyM5
DIY: Do It Yourself
5
12-12-2021 11:00 AM
andreohlsen
E60, E61 Parts, Accessories and Mods
3
01-01-2013 05:28 AM