7 buttons iDrive controller retrofit (Pictures)
06-24-2014, 05:03 PM
#12
Senior Members
Join Date: Jan 2011
Location: UpState SC
Posts: 2,348
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2008 535i LCI with sports/premium package, Sports trans with paddle shifters, CF emblems, JB4 Software, Dinan Exhaust, Navigation, M5Tech body kit, Carbon wrap interrior trim and CIC Controller.
There is a DIY from several years ago on here. when I did mine, I recall there were two cables. one to the controller and the other went to the menu button. The DIY directs you to remove four wires or so from the small connector and replace them with four wires from the large connector. then you will connect the small connector to the new controller as it only has one small receiver. The remaining four wires I taped and tucked away. Then I had to update using WINKFP. All worked well! I believe the DIY might be under the CIC retro.
06-26-2014, 01:10 PM
#13
Members
Join Date: Nov 2009
Location: Edmonton, AB
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2004 BMW 545i SMG
Im saving my pennies to do a CIC upgrade, but until then, anyone know if this will work with M-ASK? Can it be updated/coded the same way that CCC/CIC can?
06-26-2014, 01:51 PM
#14
Senior Members
Join Date: Jan 2011
Location: UpState SC
Posts: 2,348
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2008 535i LCI with sports/premium package, Sports trans with paddle shifters, CF emblems, JB4 Software, Dinan Exhaust, Navigation, M5Tech body kit, Carbon wrap interrior trim and CIC Controller.
07-02-2014, 02:14 PM
#15
New Members
Join Date: Jul 2014
Location: Perth Scotland
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Bmw e60 530i
Hey guys, just joined up and already I'm looking for a little help if poss......I have attempted this retrofit into my car, for some reason I just can't get the controller to do anything....even with the correct repinning Of the 4 pin connector, it will light up fine but refuse to move onscreen and none of the shortcuts work....
I'm sure my ccc is latest version, it has the silver colour background (if that means anything) can someone confirm the correct old-new pin locations and perhaps advise so I can get this working
I'm sure my ccc is latest version, it has the silver colour background (if that means anything) can someone confirm the correct old-new pin locations and perhaps advise so I can get this working
07-07-2014, 12:05 AM
#16
New Members
Thread Starter
Join Date: Nov 2012
Location: Dublin/Ireland
Posts: 59
Likes: 0
Received 1 Like
on
1 Post
My Ride: e39
Hey guys, just joined up and already I'm looking for a little help if poss......I have attempted this retrofit into my car, for some reason I just can't get the controller to do anything....even with the correct repinning Of the 4 pin connector, it will light up fine but refuse to move onscreen and none of the shortcuts work....
I'm sure my ccc is latest version, it has the silver colour background (if that means anything) can someone confirm the correct old-new pin locations and perhaps advise so I can get this working
I'm sure my ccc is latest version, it has the silver colour background (if that means anything) can someone confirm the correct old-new pin locations and perhaps advise so I can get this working
07-13-2014, 02:16 PM
#17
Members
Senior Members
Join Date: Jun 2009
Location: Jacksonville Florida
Posts: 639
Likes: 0
Received 1 Like
on
1 Post
My Ride: BMW 550I BLK
Model Year: 2007
Engine: N62
I would like to do this 2007 550i
Hey should I find I extra console plate and have it cut. What seven way should I get and who or where do I get coding????
07-17-2014, 07:17 AM
#19
New Members
Join Date: Oct 2013
Location: SoCal
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 07 550i
Thread
Thread Starter
Forum
Replies
Last Post
DavaiLave
E60 Discussion
13
08-02-2022 02:16 AM