westsidebalto

...but still no good option for manual transmissions?

BlaSTiWi

Ummm no this is for LCI Sport-AT (SAT).

... logically speaking ... does that long piece even resemble the oval shaped sport button on the shifter plate pic you found?

Have you read thru the thread from the beginning? The Sport button p/n = 61316922799 (no #8) already mentioned in post #17 up above ... There are only 3 wires for this mod not as many as 8 wires ...

BlaSTiWi

If you read thru the thread some member(s) w/ manual did it and at least get the better throttle & the heavier steering to work ... of course obviously the shift point is ... manual.

westsidebalto

Tray 18 (on the OEM diagram) looks like it has a button, but I'm not sure how it would work with the 12v socket.

BlaSTiWi

That part will replace the ashtray w/ just an opening to put stuff in and no 12v lighter socket (some car also has non smoker option).

westsidebalto

Yeah sorry, I have the mod installed. I meant no good option specifically for that bracket around the shifter with the button. Seems like everyone who's bought an OEM button has had an auto. My Radio Shack button just looks a little bush league.

BlaSTiWi

Yeah ... I know ... can't believe the OEM plate & button cost that much ...

westsidebalto

Yeah, that's what I feared. Not worth it because I'd lose my cell phone charger as my radar detector is plugged in under the passenger footwell.

stel_i79

i did order the bezel and the button from GARRY and guess what>?
the bezel HAVE THE BUTTON ALREADY..
so i have to return the "extra button" that i order for a refund..
now..i also order and receive the connector that goes on the bottom part of the sport button and there are 4 wires come out

now..which are the 3 wires that i use from the 4?? to connect to pin 8/9/10??
thx u

balbs

It comes with the button??? Sweet! What's the par number and number for the wiring? Your car is pre-LCI right?