HELP: 550 very rough idle.
#21
Members
Join Date: Dec 2010
Location: Bulgaria
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: '06 E60 550i
Cinder, Mine is an annoying vibration in the steering wheel at idle, minor idle fluctuation and stumbling.
I was waiting until i could pull the numbers off the valvetronic parts before i started putting her back together. I finally found where they are so i can start putting her back. Should be 2-3 weeks because i am taking my time and its a big job too.
As soon as i have her back on the road i will know if the 4 new Vanos units made any difference. I pulled apart the intake vanos and it seemed to be in very good condition. But that is on the valveronic side and it doesn't see near the cycling that the exhaust sees since that is always full duration. In other words, i am expecting to see more wear on the exhaust side.
I was waiting until i could pull the numbers off the valvetronic parts before i started putting her back together. I finally found where they are so i can start putting her back. Should be 2-3 weeks because i am taking my time and its a big job too.
As soon as i have her back on the road i will know if the 4 new Vanos units made any difference. I pulled apart the intake vanos and it seemed to be in very good condition. But that is on the valveronic side and it doesn't see near the cycling that the exhaust sees since that is always full duration. In other words, i am expecting to see more wear on the exhaust side.
I'll be tracking your progress to see if you have any success, I'm sure a lot of people would be grateful if you find the cause. I haven't been able to, so far
#22
Hi Jim, thanks for your input. All of the standard "consumable" items have been serviced and/or replaced. This is not your typical issue. People are starting to report this a little more, BMW is raising the idle to "fix" it. I want to find out what the actual fix is so I'm going in deep!
I have had this engine torn down to bits and pieces several times learning as i do this as a small side business too. The E60 and like are just starting to come into the indy shop rotation out of warranty now. they all have a cycle.
So...new Vanos units are fitted, just need to find a 30mm wrench and put her back together. Will have some results. If the new Vanos units don't fix the idle vibration, then i will be replacing all of the valvetronic components next round. This vibration is that annoying.
There has to be a clear cause of this, we will see.
I have had this engine torn down to bits and pieces several times learning as i do this as a small side business too. The E60 and like are just starting to come into the indy shop rotation out of warranty now. they all have a cycle.
So...new Vanos units are fitted, just need to find a 30mm wrench and put her back together. Will have some results. If the new Vanos units don't fix the idle vibration, then i will be replacing all of the valvetronic components next round. This vibration is that annoying.
There has to be a clear cause of this, we will see.
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
Meet & Greet Discussion
2
10-16-2015 03:07 PM
ucsbwsr
E60, E61 Parts, Accessories and Mods
4
09-19-2015 10:58 AM