Originally Posted by DB_Gutz

Could it be possible to over tighten the collar?

Originally Posted by BostonJon

did you replace the o-ring when you replaced the filter? perhaps the new filter is not seated in the same orientation on the old gasket and there is a pressure leak?

Originally Posted by twh

I'm guessing if you got a gas cap message that something you did isn't seated correctly. Would be too strange to have the gas cap die at the same time.

Originally Posted by DB_Gutz

My fuel line that comes off the in the tank fuel filter is leaking fuel from the quick connector so I've odered a new filter assembly and a new fuel line. I've found plenty of fuel filter DiY but I cannot for the life of me find even a diagram of where that fuel line even goes to from the filter. Does anyone out there have a diagram or a write up anything would help. Thanks in advance.