12\2006 525D - no throttle response (even after changing pedal)
Thread Starter
Members
Joined: Dec 2010
Posts: 121
Likes: 0
From: Romania
My Ride: remapped & modded E60 525d
Model Year: 2006
My 525D got randomly broken after it stayed for one month got 4 errors (DTC, Start assistant, engine fault-reduced power and "'not-remember") and no acceleration response.
The car idles at 1200RPM and when I press the brake goes back to 750RPM. The acceleration does not work at all.
I change the pedal but no effect, any ideas?
The car idles at 1200RPM and when I press the brake goes back to 750RPM. The acceleration does not work at all.
I change the pedal but no effect, any ideas?
Last edited by dj_rzn; Apr 14, 2018 at 12:01 PM.
Super Moderator

Joined: Jul 2011
Posts: 3,953
Likes: 361
From: Augusta, GA
My Ride: 22 BMW 540i xDrive; 05 BMW 530i
Engine: 3.0 B58; 3.0 M54
What does stayed for one month mean. Are you saying it sat for one month without driving? If so check to make sure your battery is charged
Thread Starter
Members
Joined: Dec 2010
Posts: 121
Likes: 0
From: Romania
My Ride: remapped & modded E60 525d
Model Year: 2006
I found the problem! I can't believe there are not more threads on this problem on Google.
The second plug in the ECU (the one 1 cm shorter) had oxidized pins (contacts), used some contact cleaner spray and we're good to go.
A lot of the plugs in my E60 are oxidized (esp wheel sensor, fan plug etc.), I guess the moisture got it.
The second plug in the ECU (the one 1 cm shorter) had oxidized pins (contacts), used some contact cleaner spray and we're good to go.
A lot of the plugs in my E60 are oxidized (esp wheel sensor, fan plug etc.), I guess the moisture got it.
Thread
Thread Starter
Forum
Replies
Last Post
Absolutegtr
E60 Discussion
9
Jun 7, 2014 12:05 PM
550isport
E60, E61 Parts, Accessories and Mods
17
Nov 17, 2006 09:19 PM



