Replacing Lower Control Arms
#31
Senior Members
Thread Starter
Join Date: Nov 2008
Location: OC, SoCal
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: '05 545i SMG, 35% Tint, LED Angel Eyes
![Default](https://5series.net/forums/images/icons/icon1.gif)
John,
Can you chime in?
#32
Senior Members
Join Date: Nov 2007
Location: Irving, TX (DFW)
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 05 545i 6MT
![Default](https://5series.net/forums/images/icons/icon1.gif)
This is what I saw. Not exactly for E60.
I also I read somewhere before for my previous non BMW cars, that it's always recommended to tighten bolts of suspension parts w/ rubber bushings when its loaded to make sure the bushing doesn't have stress at loaded suspension level.
(Bushing should only have stress when the suspension travels)
I came accross this thread on google search fro LS1 forum:
http://www.ls1tech.com/forums/suspen...-bushings.html
From my experience it's not necessary to load the suspension to perform most of the procedure, however it's still easiest to use some sort of drive-on lift or a cozy pit. When reinstalling, the LCA bolts should only be torqued once the vehicle is level with the suspension loaded, otherwise the bushings will prematurely wear.
This is important with rubber, but not important with poly and/or spherical bearings.
This is important with rubber, but not important with poly and/or spherical bearings.
Looking at the pic of the arm, it seems that the suspension bolt has rubber bushing that is glued/molded w/ the sleeve.
If you tighten the bolt w/ no load on the suspension = bushing rests w/o stress with unloaded suspension.
Then when you put the wheels back on and lower the car down (loading the suspension), the bushing will have unnecessary stress on the ground than if you had tighten it w/ loaded suspension.
I think this step is not necessary if you have poly bushing that is non molded to the sleeve (bushing wraps around the greased sleeve where the bushing can freely rotate around sleeve w/o giving stress)
I hope you can understand what I mean
![Big Grin](https://5series.net/forums/images/smilies/imported/biggrin.gif)
#34
Senior Members
Join Date: Nov 2007
Location: Irving, TX (DFW)
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 05 545i 6MT
![Default](https://5series.net/forums/images/icons/icon1.gif)
Good luck on the DIY.
If I lived in S.Cal, I'd be more than happy to help you guys work on it to learn before my turn changing it in the future
![Smile](https://5series.net/forums/images/smilies/imported/smile.gif)
If you don't mind writing up a DIY w/ pics whenever you are doing it.
More DIY never hurt
![Tongue](https://5series.net/forums/images/smilies/imported/tongue.gif)
#35
Contributors
Join Date: Aug 2004
Location: Quincy, MA, USA
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: E60 530i
Model Year: 2004
Engine: M54
![Default](https://5series.net/forums/images/icons/icon1.gif)
http://www.bimmerboard.com/forums/posts/3052
This is what I saw. Not exactly for E60.
I also I read somewhere before for my previous non BMW cars, that it's always recommended to tighten bolts of suspension parts w/ rubber bushings when its loaded to make sure the bushing doesn't have stress at loaded suspension level.
(Bushing should only have stress when the suspension travels)
I came accross this thread on google search fro LS1 forum:
http://www.ls1tech.com/forums/suspen...-bushings.html
My thoughts:
Looking at the pic of the arm, it seems that the suspension bolt has rubber bushing that is glued/molded w/ the sleeve.
If you tighten the bolt w/ no load on the suspension = bushing rests w/o stress with unloaded suspension.
Then when you put the wheels back on and lower the car down (loading the suspension), the bushing will have unnecessary stress on the ground than if you had tighten it w/ loaded suspension.
I think this step is not necessary if you have poly bushing that is non molded to the sleeve (bushing wraps around the greased sleeve where the bushing can freely rotate around sleeve w/o giving stress)
I hope you can understand what I mean![Big Grin](https://5series.net/forums/images/smilies/imported/biggrin.gif)
This is what I saw. Not exactly for E60.
I also I read somewhere before for my previous non BMW cars, that it's always recommended to tighten bolts of suspension parts w/ rubber bushings when its loaded to make sure the bushing doesn't have stress at loaded suspension level.
(Bushing should only have stress when the suspension travels)
I came accross this thread on google search fro LS1 forum:
http://www.ls1tech.com/forums/suspen...-bushings.html
My thoughts:
Looking at the pic of the arm, it seems that the suspension bolt has rubber bushing that is glued/molded w/ the sleeve.
If you tighten the bolt w/ no load on the suspension = bushing rests w/o stress with unloaded suspension.
Then when you put the wheels back on and lower the car down (loading the suspension), the bushing will have unnecessary stress on the ground than if you had tighten it w/ loaded suspension.
I think this step is not necessary if you have poly bushing that is non molded to the sleeve (bushing wraps around the greased sleeve where the bushing can freely rotate around sleeve w/o giving stress)
I hope you can understand what I mean
![Big Grin](https://5series.net/forums/images/smilies/imported/biggrin.gif)
Thread
Thread Starter
Forum
Replies
Last Post
turboawd
E60 Discussion
20
08-23-2017 12:27 AM
balbs
E60, E61 Parts, Accessories and Mods
10
03-12-2015 12:14 PM
balbs
E60 Discussion
0
03-09-2015 01:37 PM