NCSExpert Code Mods
#352
Members
Join Date: May 2010
Location: London
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: M3 ZCP EX:2005 BMW 535D Sport, Estate, Steptronic, Carbon Black, Black Dakota leather, Head up Display, Profi Satnav, Bluetooth - only MULF module, Bi-xenon adaptive headlights, Sportseats, Cruise control, Active steeringMods: 19
Model Year: 2011
What car do you have? Are you using a correct profile? Did you really confirm the changes by reading the unit again?
It is really interested.
#353
I set up NCSExpert using a guide (based on the e90) so not sure about profile, but coding works as I have the digital speedo working.
Yes I definitely confirmed the changes by reading the unit again.
#354
Should the inner-side halogen light of each headlight light up when cornering? Or what is its function? This one - the inner which is not lit up on the picture:
Mine started to turn on/off when cornering slowly, parking or backing up. I've never noticed it happening before switching PWM_AN_SL_V_AL_1_34 from wert_06 to wert_01.
Mine started to turn on/off when cornering slowly, parking or backing up. I've never noticed it happening before switching PWM_AN_SL_V_AL_1_34 from wert_06 to wert_01.
#355
Hi Guys. I have retrofit my BMW e60 in CCC (before I had the MASK on a board). After that mulf module doesn't want to read a phonebook from my iphone 4. Do you know what I should code in CAPPL or different module to read phone book again ? Before retrofiting everthing was ok... In CAPPL I have TELEFON_TYPE_C08 with mulf_phone value. And iPhone is paring with my bmw but I can't sync the phonebook
#356
Sometime ago I installed a amp kit in my car (Alpine PDX-5), is it possible to selectively reduce/increase some sound level.
I want warning "dongs" and pdc alert (front and back) to reduce in volume and nav guide to increase a bit.
Not seeing this coding option before I had to live with reduced volume on everything, wish I could control it selectively.
I want warning "dongs" and pdc alert (front and back) to reduce in volume and nav guide to increase a bit.
Not seeing this coding option before I had to live with reduced volume on everything, wish I could control it selectively.
#357
Members
Join Date: May 2010
Location: London
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: M3 ZCP EX:2005 BMW 535D Sport, Estate, Steptronic, Carbon Black, Black Dakota leather, Head up Display, Profi Satnav, Bluetooth - only MULF module, Bi-xenon adaptive headlights, Sportseats, Cruise control, Active steeringMods: 19
Model Year: 2011
Hi Guys. I have retrofit my BMW e60 in CCC (before I had the MASK on a board). After that mulf module doesn't want to read a phonebook from my iphone 4. Do you know what I should code in CAPPL or different module to read phone book again ? Before retrofiting everthing was ok... In CAPPL I have TELEFON_TYPE_C08 with mulf_phone value. And iPhone is paring with my bmw but I can't sync the phonebook
I had very similar problem, and after software update it was sorter, just check the version of the software you have in CCC and MULF.
#358
Members
Join Date: May 2010
Location: London
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: M3 ZCP EX:2005 BMW 535D Sport, Estate, Steptronic, Carbon Black, Black Dakota leather, Head up Display, Profi Satnav, Bluetooth - only MULF module, Bi-xenon adaptive headlights, Sportseats, Cruise control, Active steeringMods: 19
Model Year: 2011
#359
Contributors
Join Date: May 2004
Location: SoCal San Diego
Posts: 2,863
Likes: 0
Received 1 Like
on
1 Post
My Ride: 545i Sport
Model Year: 2004
Engine: N62
I did the Flashing adaptive brake lights (Break Force Display) In an emergency stop flashing the lights (like the Hazard lights).
http://www.youtube.com/watch?v=Ql4Kd-plRJM
This should be better with the double blink hazard NETTO coding (need to redo, got erased again :thumbsdown: ).
http://www.youtube.com/watch?v=Ql4Kd-plRJM
This should be better with the double blink hazard NETTO coding (need to redo, got erased again :thumbsdown: ).