NCSExpert Code Mods
I have tried this and it works....., I was so happy, but after some time I have found out, than every time I'm opening the tail gate it use the headlamp cleaning washers as well
I have the hydraulic door, and it doesn't matter if I pressed the remote control button, or in car, or just the one on the tailgate itself.
Did anyone try this?
I have the hydraulic door, and it doesn't matter if I pressed the remote control button, or in car, or just the one on the tailgate itself.
Did anyone try this?
Thread Starter
Senior Members
Joined: Oct 2009
Posts: 1,380
Likes: 4
From: Indiana, USA
My Ride: 2007 530xi: Sport, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, HD Radio, SAT, Custom NCS coded options 2008 535xi: Sport, Night Vision, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, SAT, Custom NCS coded options, Rear Seat Heat Retrofit, Passport 9500ci
Model Year: 2008
Engine: N54
Members
Joined: May 2010
Posts: 213
Likes: 0
From: London
My Ride: M3 ZCP EX:2005 BMW 535D Sport, Estate, Steptronic, Carbon Black, Black Dakota leather, Head up Display, Profi Satnav, Bluetooth - only MULF module, Bi-xenon adaptive headlights, Sportseats, Cruise control, Active steeringMods: 19
Model Year: 2011
Members
Joined: May 2010
Posts: 213
Likes: 0
From: London
My Ride: M3 ZCP EX:2005 BMW 535D Sport, Estate, Steptronic, Carbon Black, Black Dakota leather, Head up Display, Profi Satnav, Bluetooth - only MULF module, Bi-xenon adaptive headlights, Sportseats, Cruise control, Active steeringMods: 19
Model Year: 2011
Contributors
Joined: Mar 2009
Posts: 2,553
Likes: 0
From: Essex, UK.
My Ride: 2006 530 d M-sport e60
Contributors
Joined: Jul 2007
Posts: 1,100
Likes: 1
From: Saint Louis, Missouri, USA
My Ride: 2010 535i M Sport 6MT
Model Year: 2010
My INPA, EDIABAS and NCSEXPER works with my E60. I have coded the E60 vehicle successfully. However, on my E90 production date 10/2006, the same software and cable does not work. On the E90, INPA can detect the battery and ignition states, but does not communicate with any module. On the E90, NCSEXPER will read the full CAS trace (over 220 K
, but errors out when I select Back in NCSEXPER. Error message:
Coapi-1141 error FSW
FSW_PSW.MAN
, but errors out when I select Back in NCSEXPER. Error message:Coapi-1141 error FSW
FSW_PSW.MAN
Contributors
Joined: Jul 2007
Posts: 1,100
Likes: 1
From: Saint Louis, Missouri, USA
My Ride: 2010 535i M Sport 6MT
Model Year: 2010
For module MSHD:
REGENSCHLIESSEN
activ
REGENSCHLIESSENTILT
activ
I got the sunroof rain-close to work. I tested by turning ignition on (no need to start engine), turned on auto wipers, used sprayed some water on the windshield glass in front of the rain sensor / rearview mirror. Sunroof closed by itself. It may take a second auto wipe to activate sunroof rain-close.
This next part I don't have an answer for yet: After rain-close, the sunroof switch is in operative. The sunroof stayed closed. I even tried cleaning and drying the glass in front of the rain sensor, turned engine on/off/on, locked/unlocked/locked vehicle. No go. I wonder if it takes X seconds / minutes before the sunroof can be operated again after a rain-close.
REGENSCHLIESSEN
activ
REGENSCHLIESSENTILT
activ
I got the sunroof rain-close to work. I tested by turning ignition on (no need to start engine), turned on auto wipers, used sprayed some water on the windshield glass in front of the rain sensor / rearview mirror. Sunroof closed by itself. It may take a second auto wipe to activate sunroof rain-close.
This next part I don't have an answer for yet: After rain-close, the sunroof switch is in operative. The sunroof stayed closed. I even tried cleaning and drying the glass in front of the rain sensor, turned engine on/off/on, locked/unlocked/locked vehicle. No go. I wonder if it takes X seconds / minutes before the sunroof can be operated again after a rain-close.
As from page 1 of this thread I tried to look for the WELCOME lights in LMA but couldn't find anything. I know some people will get annoyed with us asking but we, or at least I have tried, to follow what was posted.
Ta


