FORGESTAR Wheels
Thread Starter
Former Vendor
Joined: Oct 2006
Posts: 19,460
Likes: 0
From: Anaheim, CA
My Ride: F13 M6
FORGESTAR Wheels
Forgestar has over 30 years of combined experience in the automotive wheel industry, bridging the gap between forged wheels and cast wheels and introduced the world's first one piece lightweight rotary forged custom flow formed wheel lineup.
Forgestar allows the customers to choose between a range of offsets for every wheel width that is offered, choosing a wheel that will perfectly fit their own individual vehicle. All Forgestar Performance Wheels are compatible with tire pressure sensor monitors and allow clearance for most high performance brake caliper upgrades.
CERTIFIED BY: SAE JWL VIA
Forgestar allows the customers to choose between a range of offsets for every wheel width that is offered, choosing a wheel that will perfectly fit their own individual vehicle. All Forgestar Performance Wheels are compatible with tire pressure sensor monitors and allow clearance for most high performance brake caliper upgrades.
CERTIFIED BY: SAE JWL VIA
The Lineup:
CF5
CF10
F14
****NEW SUPER DEEP CONCAVE AVAILABLE FOR F14! (9.5" width minimum)
Pricing - Typical setups for an E60 with any standard finish (CF5, CF10, F14):
19x9, 19x10: Retail $2070
20x9, 20x10: Retail $2610
CF5
CF10
F14
****NEW SUPER DEEP CONCAVE AVAILABLE FOR F14! (9.5" width minimum)
Pricing - Typical setups for an E60 with any standard finish (CF5, CF10, F14):
19x9, 19x10: Retail $2070
20x9, 20x10: Retail $2610
Please feel free to contact myself or Joe (TrinityAutosport) for pricing, inquiries, and/or orders.
Thank you!
Thank you!
Last edited by info@trinityautosport; Mar 28, 2013 at 08:46 AM.
Members
Joined: Mar 2009
Posts: 70
Likes: 0
From: Lexington SC
My Ride: 08 550 M Sport Pkg
Will you have 19" in stock for E60's? Can you get these in the correct offset where you would not be required to run spacers? PM me price for 19 x 8.5 semi concave (Front) and 19 x 9.5 deep concave (Rear).
Thanks,
Craig
Thanks,
Craig
Members
Senior Members
Joined: Feb 2011
Posts: 261
Likes: 0
From: New york
Can you provide some insight on which size in the CF5, CF10 and F14 would best fill the fender gap on a 2008 550i sport without needing a drop? Please also include your pricing option with tires.
Thread Starter
Former Vendor
Joined: Oct 2006
Posts: 19,460
Likes: 0
From: Anaheim, CA
My Ride: F13 M6
it would be personal preference. some are fine with the look of aftermarket wheels without dropping the car, some would like to still drop the car after adding wheels. according to rolling diameter though even when up-sizing the wheel and if the correct size of tire is put on, then the overall size in general would be roughly similar. Ill PM you some options.
Members
Joined: May 2012
Posts: 157
Likes: 0
From: Alpharetta, GA
Would it be possible to run a super deep concave square setup 19x10 with the F14's on a 535i w/sport supsension? I know Forgestar doesn't list offsets, so I didn't know if it was possible without spacers or fender/rolling.
If it's possible, I'd like 19x10 square F14 pricing in gloss gunmetal. If not, please PM me pricing for the 19x9/19x10 tradtional (super deep concave) setup in gloss gunmetal.
Edit: I think I got my answer... the 10's are too wide for the E60. 9.5" should work, but would require custom ordering.
If it's possible, I'd like 19x10 square F14 pricing in gloss gunmetal. If not, please PM me pricing for the 19x9/19x10 tradtional (super deep concave) setup in gloss gunmetal.
Edit: I think I got my answer... the 10's are too wide for the E60. 9.5" should work, but would require custom ordering.
Last edited by darkrider; May 30, 2013 at 08:50 AM.
