FORGESTAR Wheels
03-27-2013, 12:52 PM
#1
Former Vendor
Thread Starter
Join Date: Oct 2006
Location: Anaheim, CA
Posts: 19,460
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F13 M6
FORGESTAR Wheels
Forgestar has over 30 years of combined experience in the automotive wheel industry, bridging the gap between forged wheels and cast wheels and introduced the world's first one piece lightweight rotary forged custom flow formed wheel lineup.
Forgestar allows the customers to choose between a range of offsets for every wheel width that is offered, choosing a wheel that will perfectly fit their own individual vehicle. All Forgestar Performance Wheels are compatible with tire pressure sensor monitors and allow clearance for most high performance brake caliper upgrades.
CERTIFIED BY: SAE JWL VIA
Forgestar allows the customers to choose between a range of offsets for every wheel width that is offered, choosing a wheel that will perfectly fit their own individual vehicle. All Forgestar Performance Wheels are compatible with tire pressure sensor monitors and allow clearance for most high performance brake caliper upgrades.
CERTIFIED BY: SAE JWL VIA
The Lineup:
CF5
CF10
F14
****NEW SUPER DEEP CONCAVE AVAILABLE FOR F14! (9.5" width minimum)
Pricing - Typical setups for an E60 with any standard finish (CF5, CF10, F14):
19x9, 19x10: Retail $2070
20x9, 20x10: Retail $2610
CF5
CF10
F14
****NEW SUPER DEEP CONCAVE AVAILABLE FOR F14! (9.5" width minimum)
Pricing - Typical setups for an E60 with any standard finish (CF5, CF10, F14):
19x9, 19x10: Retail $2070
20x9, 20x10: Retail $2610
Please feel free to contact myself or Joe (TrinityAutosport) for pricing, inquiries, and/or orders.
Thank you!
Thank you!
Last edited by info@trinityautosport; 03-28-2013 at 08:46 AM.
04-10-2013, 07:13 AM
#2
Members
Join Date: Mar 2009
Location: Lexington SC
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 08 550 M Sport Pkg
Will you have 19" in stock for E60's? Can you get these in the correct offset where you would not be required to run spacers? PM me price for 19 x 8.5 semi concave (Front) and 19 x 9.5 deep concave (Rear).
Thanks,
Craig
Thanks,
Craig
04-10-2013, 08:42 AM
#3
Former Vendor
Thread Starter
Join Date: Oct 2006
Location: Anaheim, CA
Posts: 19,460
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F13 M6
if materials are in stock, build time for a set is 4-6 weeks. there will be no need at all to run spacers as the wheels would be made specific to your car.
05-20-2013, 01:24 PM
#6
Members
Senior Members
Join Date: Feb 2011
Location: New york
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Can you provide some insight on which size in the CF5, CF10 and F14 would best fill the fender gap on a 2008 550i sport without needing a drop? Please also include your pricing option with tires.
05-21-2013, 09:27 AM
#7
Former Vendor
Thread Starter
Join Date: Oct 2006
Location: Anaheim, CA
Posts: 19,460
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F13 M6
it would be personal preference. some are fine with the look of aftermarket wheels without dropping the car, some would like to still drop the car after adding wheels. according to rolling diameter though even when up-sizing the wheel and if the correct size of tire is put on, then the overall size in general would be roughly similar. Ill PM you some options.
05-30-2013, 08:14 AM
#10
Members
Join Date: May 2012
Location: Alpharetta, GA
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Would it be possible to run a super deep concave square setup 19x10 with the F14's on a 535i w/sport supsension? I know Forgestar doesn't list offsets, so I didn't know if it was possible without spacers or fender/rolling.
If it's possible, I'd like 19x10 square F14 pricing in gloss gunmetal. If not, please PM me pricing for the 19x9/19x10 tradtional (super deep concave) setup in gloss gunmetal.
Edit: I think I got my answer... the 10's are too wide for the E60. 9.5" should work, but would require custom ordering.
If it's possible, I'd like 19x10 square F14 pricing in gloss gunmetal. If not, please PM me pricing for the 19x9/19x10 tradtional (super deep concave) setup in gloss gunmetal.
Edit: I think I got my answer... the 10's are too wide for the E60. 9.5" should work, but would require custom ordering.
Last edited by darkrider; 05-30-2013 at 08:50 AM.