Acute Performance | Complete Brake Packages for E60
#115
Members
Senior Members
Join Date: Apr 2011
Location: South East Mass.
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2008 528i Sapphire Black | Sport | Premium | STEPTRONIC | Xenon
#116
Members
Join Date: Jun 2008
Location: San Jose, California
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2004 525i, Metalic Gray, Premium Package
Michael,
I got the Premium Package slotted/drilled rotors and brakes for all 4 wheels. Excited, planning to install this weekend.
Questions:
1. What are the minimum thickness of the front and rear rotors? I looked at what is stamped on the edge of the front rotor and it says 28.4mm. My ruler measured the rotor to be roughly 1 1/8 inches thick now, which is pretty close to 28.4mm if my math is right. They shouldn't be so close, right?
2. What is the difference between the Hawk pads I got vs. the Posi pads you also sell?
By the way, I did not realize that you also sell Premium blank rotors. I definitely want coated rotors to avoid rust, but though premium rotors are only for slotted/drilled ...
Thanks for your help!
I got the Premium Package slotted/drilled rotors and brakes for all 4 wheels. Excited, planning to install this weekend.
Questions:
1. What are the minimum thickness of the front and rear rotors? I looked at what is stamped on the edge of the front rotor and it says 28.4mm. My ruler measured the rotor to be roughly 1 1/8 inches thick now, which is pretty close to 28.4mm if my math is right. They shouldn't be so close, right?
2. What is the difference between the Hawk pads I got vs. the Posi pads you also sell?
By the way, I did not realize that you also sell Premium blank rotors. I definitely want coated rotors to avoid rust, but though premium rotors are only for slotted/drilled ...
Thanks for your help!
#117
Members
Join Date: Jun 2008
Location: San Jose, California
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2004 525i, Metalic Gray, Premium Package
Michael,
Can you help answer the questions below, esp. question #1?
Thanks!
Can you help answer the questions below, esp. question #1?
Thanks!
Michael,
I got the Premium Package slotted/drilled rotors and brakes for all 4 wheels. Excited, planning to install this weekend.
Questions:
1. What are the minimum thickness of the front and rear rotors? I looked at what is stamped on the edge of the front rotor and it says 28.4mm. My ruler measured the rotor to be roughly 1 1/8 inches thick now, which is pretty close to 28.4mm if my math is right. They shouldn't be so close, right?
2. What is the difference between the Hawk pads I got vs. the Posi pads you also sell?
By the way, I did not realize that you also sell Premium blank rotors. I definitely want coated rotors to avoid rust, but though premium rotors are only for slotted/drilled ...
Thanks for your help!
I got the Premium Package slotted/drilled rotors and brakes for all 4 wheels. Excited, planning to install this weekend.
Questions:
1. What are the minimum thickness of the front and rear rotors? I looked at what is stamped on the edge of the front rotor and it says 28.4mm. My ruler measured the rotor to be roughly 1 1/8 inches thick now, which is pretty close to 28.4mm if my math is right. They shouldn't be so close, right?
2. What is the difference between the Hawk pads I got vs. the Posi pads you also sell?
By the way, I did not realize that you also sell Premium blank rotors. I definitely want coated rotors to avoid rust, but though premium rotors are only for slotted/drilled ...
Thanks for your help!
#119
Former Vendor
Thread Starter
Join Date: Apr 2008
Location: SoCal
Posts: 5,051
Likes: 0
Received 1 Like
on
1 Post
My Ride: 14 550i
Did you measure it like this?
http://farm6.static.flickr.com/5254/...a0e23f3a88.jpg
If you're using a 12" ruler it's probably not that exact you'll want to use a caliper
http://farm6.static.flickr.com/5254/...a0e23f3a88.jpg
If you're using a 12" ruler it's probably not that exact you'll want to use a caliper
#120
hey could you pm me a quote
2004 530i
front and rear rotors drill/slotted
front and rear pads, ( p.s. i could not find stoptech pads on your site?)
also
2004 350z non brembo
full brake package as well
2004 530i
front and rear rotors drill/slotted
front and rear pads, ( p.s. i could not find stoptech pads on your site?)
also
2004 350z non brembo
full brake package as well