has anyone had this setup for more than a year? maybe 3 years?? how is it holding up? any warping on the rotors?

 

I haven't heard from any one with issues if that means anything to you.

 

How much for brake lines and pads for a 535xi? any thing available?

 

Sorry no stainless steel brake lines.

Hawk HPS pads are available
F - $100
R - $75

as well as Stoptech Street Performance
F - $85
R - $50

 

Hey Michael which one do you recommend?

 

Michael,

I got the Premium Package slotted/drilled rotors and brakes for all 4 wheels. Excited, planning to install this weekend.

Questions:

1. What are the minimum thickness of the front and rear rotors? I looked at what is stamped on the edge of the front rotor and it says 28.4mm. My ruler measured the rotor to be roughly 1 1/8 inches thick now, which is pretty close to 28.4mm if my math is right. They shouldn't be so close, right?

2. What is the difference between the Hawk pads I got vs. the Posi pads you also sell?

By the way, I did not realize that you also sell Premium blank rotors. I definitely want coated rotors to avoid rust, but though premium rotors are only for slotted/drilled ...

Thanks for your help!

 

Michael,

Can you help answer the questions below, esp. question #1?

Thanks!

 

Oops sorry didn't see the post. Let me ask and I'll let you know.

 

Did you measure it like this?

http://farm6.static.flickr.com/5254/...a0e23f3a88.jpg

If you're using a 12" ruler it's probably not that exact you'll want to use a caliper

 

hey could you pm me a quote

2004 530i
front and rear rotors drill/slotted
front and rear pads, ( p.s. i could not find stoptech pads on your site?)

also

2004 350z non brembo

full brake package as well