FS: E60 OEM amp PnP trunk subwoofer harness with built in LOC
Clean sweep is what I had also been looking into, but wasn't sure if I needed the summing device. Are there other options available or is that the best option? I have found lc8 and lc6 but again I know little when it comes down this road.
check this out:
http://www.rockfordfosgate.com/produ...7&locale=en_US
Contributors
Joined: Jan 2007
Posts: 1,615
Likes: 3
From: Orlando, FL
My Ride: 2005 530i Silver Gray/ Gray Leather. SP,PP
Yes, you will need the summing device. Another popular option is to get a Jbl Ms-8 DSP
Thread Starter
Contributors
Joined: Nov 2007
Posts: 330
Likes: 3
From: Florida
My Ride: M3
Model Year: 2017
The OEM amp harness alone is $45 shipped, but again you will need another harness to access the iDrive speaker outputs if your plan is not to cut any OEM wires. Unfortunately I do not have any more of the iDrive harnesses available and I do not know when I will have more in stock -if ever.
you have the big harness but not the white plugs pictured here:
http://i180.photobucket.com/albums/x...DSCF0332-1.jpg
??
http://i180.photobucket.com/albums/x...DSCF0332-1.jpg
??
The OEM amp harness alone is $45 shipped, but again you will need another harness to access the iDrive speaker outputs if your plan is not to cut any OEM wires. Unfortunately I do not have any more of the iDrive harnesses available and I do not know when I will have more in stock -if ever.
I am assuming this is the harness I would need to set up a signal processor then and not the bass harness or would I need both? If this is the case, I would take both you can e-mail me tyler.newland@gmail.com, if and when you get more. Just looking for cleanest way to go about all of this without hacking harnesses of course, plus you obviously know what your stuff with all of this, would be nice to talk about the direction to go rather than reading all these forums that half of the post contradict eachother.
Thread Starter
Contributors
Joined: Nov 2007
Posts: 330
Likes: 3
From: Florida
My Ride: M3
Model Year: 2017
you have the big harness but not the white plugs pictured here:
http://i180.photobucket.com/albums/x...DSCF0332-1.jpg
??
http://i180.photobucket.com/albums/x...DSCF0332-1.jpg
??
Thread Starter
Contributors
Joined: Nov 2007
Posts: 330
Likes: 3
From: Florida
My Ride: M3
Model Year: 2017
I am assuming this is the harness I would need to set up a signal processor then and not the bass harness or would I need both? If this is the case, I would take both you can e-mail me tyler.newland@gmail.com, if and when you get more. Just looking for cleanest way to go about all of this without hacking harnesses of course, plus you obviously know what your stuff with all of this, would be nice to talk about the direction to go rather than reading all these forums that half of the post contradict eachother.


