FS: 20" Maya RM1
#21
Super Moderator
Join Date: Jan 2008
Location: So. Cal (SFV)
Posts: 17,508
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2011.5 Alpine White E90 M3 | Black Novillo Leather | Carbon Fiber Leather Trim | ZCP | ZP2 | M-DCT | Navigation | Moonroof | 6FL Mods: TMS 12.5mm spacers all around l Hawk HPS Brake Pads l OEM M3 Edition Grills l Paint Matched Side Gills l Key Hole D
Originally Posted by N2TROUBLE' post='875252' date='May 11 2009, 12:38 PM
ok
pm me your number
pm me your number
#23
Members
Join Date: Apr 2009
Location: San Antonio, TX.
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 08 m5 black Safire
07 530I jet blk ,
08 Lexus gx470 black
#24
Contributors
Thread Starter
Join Date: Mar 2006
Location: SoCal
Posts: 4,239
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: No mods
Originally Posted by N2TROUBLE' post='875259' date='May 11 2009, 12:43 PM
email is jtngo86@yahoo.com
#27
Contributors
Thread Starter
Join Date: Mar 2006
Location: SoCal
Posts: 4,239
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: No mods
Originally Posted by N2TROUBLE' post='875344' date='May 11 2009, 02:39 PM
spoke with one of the guys at the shop and paid for em
1 set still available
#28
Members
Join Date: Apr 2009
Location: San Antonio, TX.
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 08 m5 black Safire
07 530I jet blk ,
08 Lexus gx470 black
[quote name='alpinewhite' date='May 11 2009, 04:43 PM' post='875352']
thanks!
Got them today awsome...... they are going to look even better mounted! Will post pics once my car gets delivered and coilovers done next week
thanks!
Got them today awsome...... they are going to look even better mounted! Will post pics once my car gets delivered and coilovers done next week
#29
Members
Join Date: Apr 2009
Location: San Antonio, TX.
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 08 m5 black Safire
07 530I jet blk ,
08 Lexus gx470 black
Well last week I finally had the rims installed and felt a very noticable vibration while driving so I took all 4 to wheels america ( a local rim repair shop) and it turns out All 4 rims were bent in several places, wheels held air and to the eye unless closely examined looked fine however wheels had very noticable shake when driving. Wheels america said they would not do the repairs and asked me to pick them up I watched as they spun both rear wheels and saw a very noticable bends on the inside of the wheel and the outer lip. From what i was told the outside lip is anodyzed aluminum which can not be properly repaired without changing the finish on all 4 lips after heating the anodyzed aluminum. I have found another shop "Wheel Fix It" that is going to do all the repairs but They are going to powder coat the lips. Chroming was going to be an additional $200 per wheel and 2 week wait minimum and seriously I dont want to sink another cent into to these wheels. I watched as they spun both rear wheels and saw a very noticable bends on the inside of the wheel and the outer lip. If the powdercoating doesnt work out then guess i will have a complete set of paper weights at a hefty price of $2100 + repair costs of $129.00 for each wheel not bad in my opinion but still money I didnt expect to have to pay. When i called EuroRev I specifically asked if the wheels were bent and was told NO! i also asked if they had ever been repaired and was told NO! I dont believe Euro Rev pulled a fast one on me but the customer who sold them to them certainly knew they were bent and Here I am in texas and cant do a thing about it...............hope they turn out ok!
#30
Originally Posted by N2TROUBLE' post='895427' date='May 31 2009, 12:03 AM
Well last week I finally had the rims installed and felt a very noticable vibration while driving so I took all 4 to wheels america ( a local rim repair shop) and it turns out All 4 rims were bent in several places, wheels held air and to the eye unless closely examined looked fine however wheels had very noticable shake when driving. Wheels america said they would not do the repairs and asked me to pick them up I watched as they spun both rear wheels and saw a very noticable bends on the inside of the wheel and the outer lip. From what i was told the outside lip is anodyzed aluminum which can not be properly repaired without changing the finish on all 4 lips after heating the anodyzed aluminum. I have found another shop "Wheel Fix It" that is going to do all the repairs but They are going to powder coat the lips. Chroming was going to be an additional $200 per wheel and 2 week wait minimum and seriously I dont want to sink another cent into to these wheels. I watched as they spun both rear wheels and saw a very noticable bends on the inside of the wheel and the outer lip. If the powdercoating doesnt work out then guess i will have a complete set of paper weights at a hefty price of $2100 + repair costs of $129.00 for each wheel not bad in my opinion but still money I didnt expect to have to pay. When i called EuroRev I specifically asked if the wheels were bent and was told NO! i also asked if they had ever been repaired and was told NO! I dont believe Euro Rev pulled a fast one on me but the customer who sold them to them certainly knew they were bent and Here I am in texas and cant do a thing about it...............hope they turn out ok!
how did you pay?