E90 DSC Incorrect identification number
Thread Starter
New Members
Joined: Feb 2017
Posts: 6
Likes: 0
From: London
My Ride: 520D
Model Year: 2007
Engine: 2.0
E90 DSC Incorrect identification number
Hi Guys
Hope someone can help me.
I have a E90 320d 2007. The ecu got wet and car wouldn't start. so purchased a second hand ecu with cas and key. The case and ecu is from a E91. Installed them and the car starts and drives fine, however a few faults have occurred. I have the DSC Light on, mileage has changed and the steering wheel feels heavy. I have been told that it needs programming with correct vin.
Can someone point me in the right direction please.
When i scanned it the code below was shown. Used Ista+ V4.07.22
005E1F - DSC: Control Unit: Incorrect Vehicle Identification number, calibration required.
Hope someone can help me.
I have a E90 320d 2007. The ecu got wet and car wouldn't start. so purchased a second hand ecu with cas and key. The case and ecu is from a E91. Installed them and the car starts and drives fine, however a few faults have occurred. I have the DSC Light on, mileage has changed and the steering wheel feels heavy. I have been told that it needs programming with correct vin.
Can someone point me in the right direction please.
When i scanned it the code below was shown. Used Ista+ V4.07.22
005E1F - DSC: Control Unit: Incorrect Vehicle Identification number, calibration required.
New Members
Joined: Nov 2012
Posts: 183
Likes: 1
From: Vancouver, WA
My Ride: E70 X5M
Model Year: 2011
Hi Guys
Hope someone can help me.
I have a E90 320d 2007. The ecu got wet and car wouldn't start. so purchased a second hand ecu with cas and key. The case and ecu is from a E91. Installed them and the car starts and drives fine, however a few faults have occurred. I have the DSC Light on, mileage has changed and the steering wheel feels heavy. I have been told that it needs programming with correct vin.
Can someone point me in the right direction please.
When i scanned it the code below was shown. Used Ista+ V4.07.22
005E1F - DSC: Control Unit: Incorrect Vehicle Identification number, calibration required.
Hope someone can help me.
I have a E90 320d 2007. The ecu got wet and car wouldn't start. so purchased a second hand ecu with cas and key. The case and ecu is from a E91. Installed them and the car starts and drives fine, however a few faults have occurred. I have the DSC Light on, mileage has changed and the steering wheel feels heavy. I have been told that it needs programming with correct vin.
Can someone point me in the right direction please.
When i scanned it the code below was shown. Used Ista+ V4.07.22
005E1F - DSC: Control Unit: Incorrect Vehicle Identification number, calibration required.
Probably you can find your answer here faster: BMW Coding Forum
Thread Starter
New Members
Joined: Feb 2017
Posts: 6
Likes: 0
From: London
My Ride: 520D
Model Year: 2007
Engine: 2.0
My two cents.
Probably you can find your answer here faster: BMW Coding Forum
Probably you can find your answer here faster: BMW Coding Forum
BMW Coding Forum
Thread
Thread Starter
Forum
Replies
Last Post