John@Motorcepts

Some more Information:

Inputs:
1) Analog RGB aka Component Input!!!!!
2) Rear Camera via Composite Connection
3) THREE A/V inputs via Composite Connection (Fits NTSC, PAL, and SECAM)
4) LCD input (from BMW IDRIVE)

Outputs:
1) TWO Composite Connection Outputs (For Installing Headrest Monitors, Visor Monitors, etc)
2) One Audio Output (Connects to your Factory Auxiliary Input to provide sound)
3) LCD Output (Connection Between Device and IDRIVE)

Toggle Switch or if connected to CAN BUS, you can switch back and forth the display to factory IDRIVE or the interface.

- Full PnP (Plug and Play).
- Can use RGB connection to connect Navigation if you do not have factory NAVI.
- Maintains OEM appearance
- Two display modes for 8.8" Monitors (16:9 and 4:3)
- 6.5" Moniters have only 4:3
- No distortion from 240 line screen from BMW. Adjusts for picture quality.

Connection is simple. Take the IDRIVE out and unplug the connection. Use the supplied connections to connect IDRIVE with interface and simple connect 12V power, ACC, and ground. Connect a DVD player, PS2, etc.

Fits the following vehicles: E87, E90/91, E60/61, E63, E70, E71.

Need ten committers! Product is made in Korea. Now accepting full payments of $400 or you may make a deposit of $250 and when the product comes, pay the remaining $150. Please send payments to brabusw209amg@gmail.com. Once group buy is closed, I will not be able to issue any refunds. Thank you.

Same Interface as this in action (I am not affiliated with the youtube user):

1)
2)
3)
4)
5)
6)
7)
8)
9)
10)

turbogate

Sorry if I'm repeating what you said, but besides power connection, everything else is plug-n-play? signal etc? ACC I'm assuming is accessories switch?

Would be nice is someone came up with a plug-n-play kit for the 12V, ACC etc like the Dension to make it 100% Plug-n-play. I remember in the Tv2nav thread, people didn't agree with which power source one should use.

I'll keep checking this thread for progress, very interested.

Thanks

John@Motorcepts

Everything is plug and play besides the 12Volts, ACC, and ground. 12 volts is the power that goes on all the time. ACC is only on when the key is in ignition and turned to on, and ground is self explanatoru.

When I installed the dension, I spliced into the 12 volt.

The best power source would always be located in the fuse box. I would get the power from there but u can always find other power sources elsewhere.

John@Motorcepts

btw, if u have dension, u already got an aux input

code37

just wanted to verify this is gb is just for wires that will allow video/sound for the idrive (for bmw's with navi?)

Does this come with the same kit as tvnav2go?/

I'm all for it, if you can post a DIY. I'm not that good, but i can get things done. so let me know i might be interested.

John@Motorcepts

there has been DIY posts for the tvnav2go. I dont have a DIY as I do not plan on installing one in my car. It's for both navi and non-nav cars. If you don t have navi, it's great since u can integrate aftermarket navi and maintain factory look!

kapusta

If the $400 is just for the video interface, it's not worth it. I got mine off of eBay for $350 from audio_navi_part store:
http://cgi.ebay.com/BMW-E60-E61-E63-E70-E71-E90-Navi-Multimedia-interface_W0QQitemZ170280549291QQcmdZViewItemQQptZCar_Video_Navigationworks like a charm.

John@Motorcepts

i am not sure where that item is. It may be made in China. This item is made in Korea. When it comes to tinkling with the idrive, i'll only get the best quality ones.

John@Motorcepts

update: I found one more supplier and i am trying to squeeze the best price from them. mebbe i can get it even cheaper. keep you guys updated and cross your fingers.

John@Motorcepts

GREAT NEWS! Found two suppliers. $350 shipped and if you're local, $330 picked up.