Car: BMW 525d E61 06 NON m-sport

Wheels and tyres: 9x19 255/35r19 offset 11 in front and 8 in rear.

What do you guys think? are they gonna fit or do i have to do some fender work on the car?
Because i want to lower the car after the wheel fitment about 30-40mm in front and match the rear whit 20-30mm

Sorry if my English is bad

 

Here's a useful calculator: http://www.rimsntires.com/rt_specs.jsp

You can type in the original and new wheel/tire specs and compare them. Then you can go next to your car with measuring tape and make the conclusions. That's what I did, before I purchased my 20's

 

I think you will have some trouble installing them because of rubbing.
9x20 would be 275/30/19, but an offset of 8 is not much... I have some OEM 167 and have 275/30/19 with an offset of 17 and it sits flush without spacers with no rubbing at all, but an offset of 8 is very hazardous IMHO..

Ivano

 

Ok now i have mounted my new rims!
Size: 9x19" Audi New RS6 original rims ET32 whit spacers 5x120 -(24mm)-> 5x112 now it´s ET9
tyres: Pirelli Pzero 255/35r19

Will send some pictures when I have time to take some =)

 

Please post pictures soon. The ET sounds quite radical, so I'm eager to see how they look.

 

Audi rims on a BMW?

hm.. I'm quite astonished how it will look..

 

Here are some pictures. sorry or the crapy pic Phone camera =)

 

what happen to the headlight washer cap?

 

I mounted the m-tech front and haven´t got the cap yet! I will get them this week, painted and redy!