E60 M5 engine reduced power
Thread Starter
New Members
Joined: Feb 2015
Posts: 1
Likes: 0
From: uk
My Ride: beast
E60 M5 engine reduced power
Hi guys,
Wondered if anyone could help me. I have an E60 M5 2005, about 54,000 on the clock. the car is currently saying reduced power, with the following error codes shown on a Bosch KTS 670,
2B40 Internal Fault, Faulty.
2B57
2796
Last two are system emergency mode.
I did have the erratic dsc,abs etc possibly from steering wheel angle sensor, but thats recently stopped.
On searching, i found the 2B40 to be the ionic current module. Switched them round but still getting fault on bank 2?
Any help greatly appreciated!
Wondered if anyone could help me. I have an E60 M5 2005, about 54,000 on the clock. the car is currently saying reduced power, with the following error codes shown on a Bosch KTS 670,
2B40 Internal Fault, Faulty.
2B57
2796
Last two are system emergency mode.
I did have the erratic dsc,abs etc possibly from steering wheel angle sensor, but thats recently stopped.
On searching, i found the 2B40 to be the ionic current module. Switched them round but still getting fault on bank 2?
Any help greatly appreciated!
Members
Joined: Apr 2012
Posts: 53
Likes: 0
From: Washington State
My Ride: 2007 550i fully loaded. MODS; RPi scoop and BMC filter upgrade with carbon filter delete. All LED interior, LED plate lights, R1 rotor and pad upgrade, Magnaflow cat back system.
Waiting to instal; AG F-10 rep wheels, LED sides and fogs.
Future MODS; Buy an M5!!
Hello,
I would post that question on M5 board's forums. Ton of M5 owners over there that can probably help you out. But of course, check back here often.
I would post that question on M5 board's forums. Ton of M5 owners over there that can probably help you out. But of course, check back here often.
Thread
Thread Starter
Forum
Replies
Last Post