Reliability of the Umnitza Orion V2.
#41
Senior Members
Join Date: Mar 2011
Location: San Diego
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2007 ★ Alpine White
#42
![Default](https://5series.net/forums/images/icons/icon1.gif)
Just got mine as well and was hoping to get this project started this weekend but little worried now...
#45
Former Vendor
![Default](https://5series.net/forums/images/icons/icon1.gif)
On any ring that doesn't have any "stress" when installed, this will never happen to it. If you have some stress on the ring for whatever reason the bottom center negative solder point loses contact if it's compressed. If you know how to solder, you can - even prior to install - reinforce this section by gently prying open the back cover and adding a tiny bit of solder. We have done this on 5-7 failed rings and have never had that problem reoccur.
This does not affect larger rings - if your larger ring isn't lighting up (horseshoe) style it's 99.999999% chance it's the control box connection coming loose. Just reseat the connector and it's all good.
For those of you having this problem, if you do not want to deal with solder, we'll be more than happy to replace any rings for you that you believe are not operating properly.
This does not affect larger rings - if your larger ring isn't lighting up (horseshoe) style it's 99.999999% chance it's the control box connection coming loose. Just reseat the connector and it's all good.
For those of you having this problem, if you do not want to deal with solder, we'll be more than happy to replace any rings for you that you believe are not operating properly.
#47
Senior Members
Join Date: Nov 2011
Location: Los Angeles, CA
Posts: 924
Likes: 0
Received 1 Like
on
1 Post
My Ride: 2008 AW N52 with sports package & premium package; natural brown interior
MODs:
Orion V2s
3000K H8 Yellow Fogs
Matte Black Kidney Grills
20" Miro 111
Hankook V12 Tires
H&R Sport Springs
Special coding via Simon (dbl flash hazards, digital velocity, etc.)
LED Side Markers from Trinity Autosports
LED License Plate Lights from Trinity Autosports
Carbon Delete
BMC Air Filter
RPI Scoop
RPI GT Exhaust
Future MODs:
Mtech Kit
KW Variant 2 Coilovers
CIC Retrofit
Upgrade Audio System
#48
Senior Members
Join Date: Mar 2011
Location: San Diego
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2007 ★ Alpine White
![Default](https://5series.net/forums/images/icons/icon1.gif)
but... if your resealing it, since it's not the BMW sealant, couldn't you open up your headlights easier now? or do they have to be cut open again?
#49
Contributors
Join Date: Dec 2010
Location: BW
Posts: 385
Likes: 0
Received 2 Likes
on
2 Posts
My Ride: Many BMW's
![Default](https://5series.net/forums/images/icons/icon1.gif)
Sorry for your troubles and of course we're going to replace it.
All of this has - after lengthy discussions with our engineers - been attributed to a small batch of 9X rings (not 12X) where if you put undue stress during install on the ring itself where it's "compressed" even a little, the two halves of the ring lose solder contact at the bottom center on the "negative" solder (the top of the center/bottom section of the ring is negative, the bottom of the center/bottom of the ring is positive).
If you know how to solder well, you can fix it yourself very easily. All the new batch rings have already had this additional solder during production done for them because this issue was earlier discovered on our 6X rings for another car. So anything from about February on should be fine, but some may have slipped through.
In any case, we can:
a) repair your ring
b) give you guidance on how to fix the ring (for time savings this is an option).
c) replace your ring (but we will need your rings back so we can repair them)
Please email us and we'll be happy to assist you quickly.![Twoup](https://5series.net/forums/images/smilies/imported/twoup.gif)
All of this has - after lengthy discussions with our engineers - been attributed to a small batch of 9X rings (not 12X) where if you put undue stress during install on the ring itself where it's "compressed" even a little, the two halves of the ring lose solder contact at the bottom center on the "negative" solder (the top of the center/bottom section of the ring is negative, the bottom of the center/bottom of the ring is positive).
If you know how to solder well, you can fix it yourself very easily. All the new batch rings have already had this additional solder during production done for them because this issue was earlier discovered on our 6X rings for another car. So anything from about February on should be fine, but some may have slipped through.
In any case, we can:
a) repair your ring
b) give you guidance on how to fix the ring (for time savings this is an option).
c) replace your ring (but we will need your rings back so we can repair them)
Please email us and we'll be happy to assist you quickly.
![Twoup](https://5series.net/forums/images/smilies/imported/twoup.gif)
Unfortunately it happened , those were installed in July last year , worked perfectly fine till last week , the X12 half ring dimmed most of the time ( picture attached ) , as you said ,, it sounds like soldering loose issue but i doubt it's the power pox problem because the inner ring works fine unless its something wrong inside the power box itself ,, will give it another try once the guy comes back during the day so I can have a look and try to troubleshoot more ..
#50
Contributors
Thread Starter
Join Date: Nov 2007
Location: NY
Posts: 3,939
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://5series.net/forums/images/icons/icon1.gif)
Just scrape off the glue you used to seal it the first time. Depending on what you use to seal it, it would either be easy or hard to remove. I wouldn't advise you to cut another line.