quads
Senior Members
Joined: Feb 2010
Posts: 300
Likes: 0
From: Montreal
My Ride: 2015 435xi GC
specific to inline-6 engines? is the v8 the deal-breaker on quads?
looking to get informed before making any moves..
Former Vendor
Joined: Nov 2005
Posts: 3,680
Likes: 2
From: East Ba
My Ride: M5
Model Year: 2008
I hope the exhaust looks better than it did on the photos, soon as you get more photos, we'll use your car as the car on our site that defines the product:http://umnitza.com/5series-quad-exha...0i-p-5678.html
The current photos show the straight cut, last minute we decided to do rolled tips because they looked better and more finished.
on the quads. Let's hear it. Post vid.
Let's get a vid, it should sound great.they are 83mm inside diameter but overall diameter should be closer to 86mm with the rolled tips.
That's what the 3 local customers have stated, we had a dyno run on one of them, but he forgot to do the pre-install dyno run.
http://www.umnitza.com/gallery/exhaust?page=2
Former Vendor
Joined: Nov 2005
Posts: 3,680
Likes: 2
From: East Ba
My Ride: M5
Model Year: 2008
all they did was making pipe coming out from the exhaust from drive side and make a single pipe and route to the passenger side.. there is a place where you can put exhaust hanger on the passenger side when you take the bottom panel off...
OP... looks like your passenger tip is little higher than driver side from that picture..
VID requested asap..!!!!!
OP... looks like your passenger tip is little higher than driver side from that picture..
VID requested asap..!!!!!
It's actually equalized in the exhaust chamber so you don't have that annoying single side exhaust smoke and grime while the other side stays unusually clean and never has any smoke coming out of it.
Installs for this shouldn't be more than $150, it's less than 30 minutes of work.
Thread
Thread Starter
Forum
Replies
Last Post
myfiveserie1818
Private Member Classifieds
12
Feb 20, 2016 07:56 PM
pdubq
Complete Car Sales
0
Jul 18, 2015 06:16 AM