Orion V2 Install
#143
Contributors
Thread Starter
#144
Contributors
Thread Starter
If thats your CAR, let me tell you thats my favourite color. My boss has the same color with the Maroon interior and I LOVE it.
#145
Contributors
Join Date: Dec 2010
Location: BW
Posts: 385
Likes: 0
Received 2 Likes
on
2 Posts
My Ride: Many BMW's
Thanks bro ,, unfortunately the dealer didn't bring the silver stone M5's with Maroon Interior ,, all of them came with like very light silver color interior .. still not bad combination ...
#146
Contributors
Thread Starter
it would be your color with the maron interior if possible -- Realy love that color combo.
Enjoy your ride bud
#147
plans to install these on my friends E92, but get the problem with the wiring cause the AE plug of e92 is different than e60,so im thinking to solder it, there are three wire on the AE plug, could i just cut them off the plug and solder it with the two wire from the orion v2 ring. is it gonna work?
Uploaded with ImageShack.us
sorry for the upside down image
Uploaded with ImageShack.us
sorry for the upside down image
#148
Contributors
Join Date: Dec 2010
Location: BW
Posts: 385
Likes: 0
Received 2 Likes
on
2 Posts
My Ride: Many BMW's
the brown ones are the ground ( Nigative ) , you can cut them and attach them to the brown cable of the Orion Power box but make sure they stay together because looks like it forwards the gournding to another part of the headlight ...
get yourself a few of these terminals ,, it's better than soldirng and easy to swap parts in the future
http://cgi.ebay.com/150-3M-T-Taps-Male-Insulated-Wire-Terminal-Connectors-/200565569239?pt=LH_DefaultDomain_0&hash=item2eb2a3b6d7
or
http://cgi.ebay.com/25-3M-T-TAP-Quick-Wire-Connector-Blue-16-14-Ga-Gauge-/190483044280?pt=LH_DefaultDomain_0&hash=item2c59ac97b8
so you don't need to cut the OEM connector
get yourself a few of these terminals ,, it's better than soldirng and easy to swap parts in the future
http://cgi.ebay.com/150-3M-T-Taps-Male-Insulated-Wire-Terminal-Connectors-/200565569239?pt=LH_DefaultDomain_0&hash=item2eb2a3b6d7
or
http://cgi.ebay.com/25-3M-T-TAP-Quick-Wire-Connector-Blue-16-14-Ga-Gauge-/190483044280?pt=LH_DefaultDomain_0&hash=item2c59ac97b8
so you don't need to cut the OEM connector
#149
Contributors
Thread Starter
plans to install these on my friends E92, but get the problem with the wiring cause the AE plug of e92 is different than e60,so im thinking to solder it, there are three wire on the AE plug, could i just cut them off the plug and solder it with the two wire from the orion v2 ring. is it gonna work?
Uploaded with ImageShack.us
sorry for the upside down image
Uploaded with ImageShack.us
sorry for the upside down image
You dont need to solder.
1. Cut off the pins on the Orion V2's. Then peel the wires at least an inch. Open the OEM connector sockets and put the peeled wires into the socket. The same way the other wires are going into the socket. Then tape the Orion wires on to the OEM wires so that they dont come off.
2. Another simple way would be to use Wire Taps like Ehsan has pointed out, they are available in Radio Shack