luluslc

I am doing a M5 front and rear bumper mod to my 04 545i, however I am running in to fitment isssues with the front bumper. I have Seibon fenders and OEM M5 front bumper. Wondering if I have the wrong bumper, does being lci matter or not? If so, is that the problem I am having? Or did I get a little screwed on those fenders? (fyi, fitting them to the car took some adjustment-finally got them to line up with the doors, but huge gabs with the hood (Seibon as well)).

B_Schnell

Not familiar with Seibon Fenders? but M5 fenders are slightly wider than non M5 E60 so to put OEM M5 Front bumper on is possible but there are plenty of posts that indicate people have had problems fitting correctly. The rear M5 bumper goes on ok, but the front doesn't fit right-- too wide, but in your pics it looks too narrow I guess due to the Seibon Fenders? there are plenty of guys on this Forum that could help. Call Joe at Trinity Autosport. He should be able to assist.

Howitzer

Send a PM to member: Rizbel. He has an OEM m5 front end installed on a non-M E60.

Presley348

I had to buy 2007 BMW OEM M5 front wide Fenders which are widest fit my BMW OWM FRONT BUMPER WITH M5 frender gills, you will akso need the acuallty M5 tires to look right the front 255

west

It almost looks as if the bumper is sitting too far forward. Did you fit the OEM M5 bumper on the non-M carrier?,..or did you get the OEM M5 carrier to go along with the OEM M5 bumper? I am in the process of doing the same to my ride (except going with OEM fenders), and these are the parts we had to order to do it correctly:

41-35-7-898-315 - Side Panel Fender Right
41-35-7-898-316 - Side Panel Fender Left
51-13-7-896-849 - Side Vent Grille Right
51-13-7-896-850 - Side Vent Grille Left
51-11-7-895-740 - Carrier
51-11-7-898-133 - Shock Left
51-11-7-898-134 - Shock Right
51-11-7-898-120 - Flap (towing eye)
51-11-7-899-051 - Front Bumper (primed)
51-11-1-973-721 - Holding Strap
51-11-7-895-739 - Grid
51-11-7-900-826 - Spoiler
51-11-7-895-743 - Front Left Brake Duct
51-11-7-906-473 - Front Left Brake Duct Bracket
51-11-7-895-744 - Front Right Brake Duct
51-11-7-906-474 - Front Right Brake Duct Bracket
51-11-7-895-735 - Support Side panel front left
51-11-7-895-736 - Support Side panel front right
07-14-7-142-326 - Clip
51-11-7-898-151 - Coverin Primed Left
51-11-7-898-152 - Coverin Primed Right
51-71-7-896-839 - Front Left Fender Liner
51-71-7-896-840 - Front Right Fender Liner
xx-xx-x-xxx-xxx - Front Undersheild

Some of the parts listed above won't have much an impact on overall fitment as you're seeing (clips, covers, mesh grid,...), but things like shocks and carrier may have more of an impact on overall fitment. I'd present this list to your body shop and have them go over it looking for clues to the problem. Good luck.

Cwest

I have the same fitment on my M5 front bumper on the sides also, but not that noticeable. I do have the shortned end where the bumper meets the fender on the side like yours. I think for a perfect fitment you would need to get an M5 fender.

balbs

Have you seen this thread?

https://5series.net/forums/topic/108...pers-retrofit/