HUD retrofit - Parts list
#81
Probation Members
Join Date: May 2020
Location: Los Angeles
Posts: 1
Received 0 Likes
on
0 Posts
My Ride: 2008 BMW 528i
#83
New Members
Join Date: Jan 2013
Location: Portugal
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW E60 535d DPF+EGRcoolerOFF CIC HUD 330kphDials
Model Year: 2005
Engine: 35d M57
Okay members, -thank to BenAnd!!- now we have the complete list of parts we need:
HUD Unit (I have here 62 30 9 154 603, for left hand drive cars, up to 5/2007)
(prices vary from EUR 60 to 4-500 on eBay)
+
HUD Windshield
+
Hud dashboard or cutting your non HUD dashboard
+
62306934584 (If you have black dashboard - /6 for grey)
62306936221 (trimming)
61316925289 (Xenon + HUD lights control) or 6131 6 946 339 if you want also night vision.
61359120310 (hud light/rain sensor)
61136906535 (LVDS connector)
61120142318 (LVDS cable, 7 metres grin.gif)
2 x 6113 6 901 847 ( male end-connector for LVDS cable )
2 x 6113 6 901 846 ( female end-connector for LVDS cable )
1 x 6113 8 387 214 ( LVDS cable housing at the connector at the HUD )
1 x 6113 8 384 550 ( 12 pin connector at the HUD )
20 x 6113 1 393 704 ( wire pin's for the connector at the HUD and the light switc , you need 14 , but then you have some to "loose" ).
(about EUR 300 in Europe)
+
A brave man
+
10 hours
+
Good luck!
(Pls Ben correct me if I'm wrong)
And now?
I think dealers must have guides/instructions to replace the unit in case of failure. (+ we need PDF to unmount the dashboard)
HUD Unit (I have here 62 30 9 154 603, for left hand drive cars, up to 5/2007)
(prices vary from EUR 60 to 4-500 on eBay)
+
HUD Windshield
+
Hud dashboard or cutting your non HUD dashboard
+
62306934584 (If you have black dashboard - /6 for grey)
62306936221 (trimming)
61316925289 (Xenon + HUD lights control) or 6131 6 946 339 if you want also night vision.
61359120310 (hud light/rain sensor)
61136906535 (LVDS connector)
61120142318 (LVDS cable, 7 metres grin.gif)
2 x 6113 6 901 847 ( male end-connector for LVDS cable )
2 x 6113 6 901 846 ( female end-connector for LVDS cable )
1 x 6113 8 387 214 ( LVDS cable housing at the connector at the HUD )
1 x 6113 8 384 550 ( 12 pin connector at the HUD )
20 x 6113 1 393 704 ( wire pin's for the connector at the HUD and the light switc , you need 14 , but then you have some to "loose" ).
(about EUR 300 in Europe)
+
A brave man
+
10 hours
+
Good luck!
(Pls Ben correct me if I'm wrong)
And now?
I think dealers must have guides/instructions to replace the unit in case of failure. (+ we need PDF to unmount the dashboard)
Alex and other users, i have to let you know that the RLS (non HUD, 309 and equivalents) can be flashed the 310 software with success and have the HUD function correctly with the sunlight.
For this you have to use winKFP with expert and flash the file ...310A.
i had to do it once in expert to change the BMW number to 310 and it failed at the end, then did it again thru confort and choose version and all went ok
hope it helps ppl save money and time doing the retrofit
#84
New Members
Join Date: Jan 2017
Location: Vietnam
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 530i N52
Alex and other users, i have to let you know that the RLS (non HUD, 309 and equivalents) can be flashed the 310 software with success and have the HUD function correctly with the sunlight.
For this you have to use winKFP with expert and flash the file ...310A.
i had to do it once in expert to change the BMW number to 310 and it failed at the end, then did it again thru confort and choose version and all went ok
hope it helps ppl save money and time doing the retrofit
For this you have to use winKFP with expert and flash the file ...310A.
i had to do it once in expert to change the BMW number to 310 and it failed at the end, then did it again thru confort and choose version and all went ok
hope it helps ppl save money and time doing the retrofit
the non-hud RLS does not have straight light sensor to get the light value in front of our hood. So how can it adjust HUD brightness correctly?
#85
New Members
Join Date: Jan 2013
Location: Portugal
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW E60 535d DPF+EGRcoolerOFF CIC HUD 330kphDials
Model Year: 2005
Engine: 35d M57
i havent disassembled it but from the outside looks to have the exact same sensors both in 309 and 310.
anyway, it works
#86
New Members
Join Date: Oct 2020
Location: NL
Posts: 3
Received 0 Likes
on
0 Posts
My Ride: BMW E32 and Alpina B5
Hi,
Has anyone got details pictures about the mechinical fixture parts of the HUD projector (pre-lci)?
Parts received from the junkyard this week..however did not see where and how to mount the 2x black brackets (most likely number 7 and 8 from ETK HUD), besides the assembly of the height adjuster
Clear pictures well appreciated,
Thanks,
Has anyone got details pictures about the mechinical fixture parts of the HUD projector (pre-lci)?
Parts received from the junkyard this week..however did not see where and how to mount the 2x black brackets (most likely number 7 and 8 from ETK HUD), besides the assembly of the height adjuster
Clear pictures well appreciated,
Thanks,
#87
Probation Members
Join Date: May 2021
Location: Seattle WA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Turbo pickup?
HUD sub harness diagram?
I have a customer with a 2010 M5, without HUD. He also has a 08 M5 with HUD as a donor. I have the HUD, dashboard, and related parts to do the swap from him. And with this parts list, I assume ill have everything I need to complete this retrofit. Although, I have not seen a single thread of a wiring diagram reference to build this sub-harness. I guess I could look up the 08's harness and copy that, but from a glance that vehicle's body harness has the HUD connector built into it, there is no sub-harness present. Does anyone have a thread on them actually performing this retrofit and building their sub-harness?
#89
New Members
Join Date: Oct 2021
Location: Montreal
Posts: 31
Likes: 0
Received 6 Likes
on
5 Posts
My Ride: 2010 535i XDrive
RLS wiring diagram
I've used this thread to retrofit the HUD. All is done and working, but I keep getting an error for the new RLS (the one that works with HUD)
I think I messed up the wiring... can anyone tell me what the pin out is for the RLS?
The original RLS was round with 3 pins, the new one is rectangular with 4pins (the windshield was replaced to the HUD windshield, so the new sensor is installed correctly, but doesn't seem to be wired correctly)
any help is appreciated. Thanks.
I think I messed up the wiring... can anyone tell me what the pin out is for the RLS?
The original RLS was round with 3 pins, the new one is rectangular with 4pins (the windshield was replaced to the HUD windshield, so the new sensor is installed correctly, but doesn't seem to be wired correctly)
any help is appreciated. Thanks.