really tried to not make a post as this might just be super easy, or i am just horrible at searching...and ive been searching all morning. anyways just successfully retro fitted CCC from a non nav m.ask. everything works fine. i want to add the AUX as its not on the new CCC unit like i had coded on the mask. i was told i need to add $609 option to the VO but i can find any info on how to do that. i finally got a netbook with inpa and ncsexpert loaded and ive been researching the last couple days on coding, and ive been playing and getting comfortable with it, but no where can i find info on adding to the VO so i can add the AUX. any help? been stuck on this all morning and would like to give it a shot since i finally have everything working far as the coding programs.

 

ok i finally found a DIY on adding to the VO. following the steps, i added $609 to VO on CAS and LM. when i go back to try code to add AUX, on the list i now see CAPPL and mask is gone. so im assuming it went well? but when i try to read CAPPL i get an error.

Error in CABD! look at cabi.err and error.log
COAPI-2041 : wrong ecu coding idex
a_e65: codierindex = 0ah


any ideas??

 

never mind again! i figured it all out and everything has been successfully coded! got my AUX in and while i was at it, finally got the legal disclaimer to not show up!! i think i'm getting the hang of this coding thing!

 

Its actually quite nice to post the solution as well, amigo

 

Slightly off topic, but where is the best place to learn about coding and all that is needed? Thanks.

 

Searching these forums and also bmwcoding.com and for my situation, I just had to update ncsexpert. Found PDF tutorials on everything I needed to know. Just research like I did and you'll be on your way to coding.

 

Can you install and code a aux cable in my 05 545i?