Hamann Front M tech splitter
#21
Senior Members
Joined: Jan 2011
Posts: 2,348
Likes: 3
From: UpState SC
My Ride: 2008 535i LCI with sports/premium package, Sports trans with paddle shifters, CF emblems, JB4 Software, Dinan Exhaust, Navigation, M5Tech body kit, Carbon wrap interrior trim and CIC Controller.
Another thin its good for is a curb finder. You know those little wire things that stuck out from the car years ago? When I had mine on, I was puling into Starbucks drive through which happened to be an old bank. I got a little too close to the curb with my left side. I heard it start to scrap and stopped, then decided to back up. Bad move, the lip dug into the curb as I pulled back and then I heard a loud pop noticed several people looking at me. I got out and my bumper had pulled away from the car! The clips were broken at the wing area. I was able to make a repair that actually secures the bumper much better than the original umnitza crap. Not sure what would have happened if bumper was OEM. I do know those clips are much stronger.
#22
Senior Members
Joined: May 2012
Posts: 373
Likes: 0
From: Marietta, GA
My Ride: Modded 2010 Carbon Black M5 SMG and Modded 2008 Dinan 550i Sport
Mine is lowered on Dinan suspension which is a pretty moderate drop. A lot less then some of the aggressive ones on here.
#23
Here is my Hamann Splitter on OEM M-tech bumper. This is prior to installing coilovers sitting on stock sports suspension + 19' wheels (245/35/19).
I was scraping before the drop and I scrape even more. However, I enjoy the aggressive look and get a lot of compliments.
Hope you get an idea of how low it will become in the fronts.
I was scraping before the drop and I scrape even more. However, I enjoy the aggressive look and get a lot of compliments.
Hope you get an idea of how low it will become in the fronts.
Thread
Thread Starter
Forum
Replies
Last Post
socale39
Complete Car Sales
9
09-05-2023 08:30 AM