King

Make settings in the ACM Service Menu for all cars
The systems installed in the car must be selected in the ACM Service Menu.
Systems that are not selected are skipped when scrolling or are hidden from the customer.
To call up the ACM Service Menu:
- Press and hold the ?Menu? button to bring up the accessory menu
- Move the controller once to the right
- Move the controller 3 times to the left
- Press controller once
The ACM Service Menu is displayed on the control display.
By turning and pressing the controller, you can now select or disable systems that have or have not been installed.
Selected and unselected systems are shown in SW.
Selectable systems are shown in WS

For cars with ACM software version older than C23i05V1 only
There is an ?Auto Position? button in the ACM Service Menu under ?Setup? after this version.
In order to ensure the correct display, this function must be activated after installation, repairs or a software update
of the car.
In addition, the exact position of the ?AUX IN? button in the Entertainment Menu of the car is to be set
in the ACM Service Menu under ?Setup?, ?AUX Position?.
Exit ACM Service Menu.
All cars
- Conduct a function test
- Re-fit the car components as required
Call up Entertainment Menu.
Check the level (0 or 1) and position of the ?Audio AUX?
button (1) and/or the ?AUX IN? button (2) in the respective
line.
Call up the ACM Service Menu (press and hold the Menu
button, move controller 1 once to the right and 3 times to
the left, press the controller).
Using the ?AUX Level? (1) button, select the line
(level 0 or 1) in which the ?AUX IN? button is located.
Cars with ?AUX IN? button in level 0 only
Using the ?AUX Pos Level 0? button,
select the position of the ?AUX IN? button.
Cars with ?AUX IN? button in level 1 only
Using the ?AUX Pos Level 0? button, select the position
of the ?Audio AUX? button.
Using the ?AUX Pos Level 1? button, select the position
of the ?AUX IN? button.


Position number goes from right to left.
Hope this will help you.
Try to find install instructions for acm-module. There you will find this information.
I try to upload ACM install instructions, but I aren`t permitted to do that.
I set the position for cd in my acm for fun, and then try to play video, and sound goes back to cd after about 3 sec so I belive this is your problem.

sparky

Thanks once again King. i believe you gave me the solution to my problem. Will try that tomorrow If you can, please send me the ACM instructions to my email address at dkoumentos@yahoo.com.

sparky

Thank you King I just fixed my problem with your instructions But an other problem suddenly came up. By changing the "Aux level" my 8,8" board monitor started blinking Any ideas? Do i have to code it somehow to stop it from blinking???

PS. Is there any way to view videos through USB-ACM while the car is moving like unlocking the OEM TV with a Module or some kind of a coding?

King

I send you an e-mail.