///530d - Spring updates
05-06-2012 | 12:01 PM
#41
Thread Starter
Contributors
Joined: Apr 2007
Posts: 5,851
Likes: 3
From: Kajaani, Finland
My Ride: Bmw 530d 2004
So, the 35d injectors were installed yesterday, and remapping + dynoing done as well. What can I say, I'm very pleased with the results 
.
My car is equipped with a manual gearbox, therefore the highest possible power and especially torque numbers were NOT tickled out.
However, from this we started (OEM) and achieved this:
- 218hp (engine power) --> 326whp (Note! WHEEL horse power)
- 500Nm/369 lb/ft (from the engine) --> 666Nm/491 lb/ft (from the wheels
)
The injector surgery:
About to go! (The wheels were protected well
):
One pull on the dyno:
http://www.youtube.com/watch?v=Nio_Hu0o7eA&feature=youtu.be"]http://www.youtube.com/watch?v=Nio_Hu0o7eA&feature=youtu.be
The outcome:
- Antti -
.My car is equipped with a manual gearbox, therefore the highest possible power and especially torque numbers were NOT tickled out.
However, from this we started (OEM) and achieved this:
- 218hp (engine power) --> 326whp (Note! WHEEL horse power)
- 500Nm/369 lb/ft (from the engine) --> 666Nm/491 lb/ft (from the wheels
)The injector surgery:
About to go! (The wheels were protected well
):One pull on the dyno:
http://www.youtube.com/watch?v=Nio_Hu0o7eA&feature=youtu.be"]http://www.youtube.com/watch?v=Nio_Hu0o7eA&feature=youtu.be
The outcome:
- Antti -
05-08-2012 | 01:15 AM
#43
Thread Starter
Contributors
Joined: Apr 2007
Posts: 5,851
Likes: 3
From: Kajaani, Finland
My Ride: Bmw 530d 2004
Yeah! Already drove approx. a 500km trip with the car and I love it. Next weekeend is reserved for a light detail and interior clean up so that the car should be ready for the little show at the next weekend.
- Antti -
- Antti -
! I definitely need that!
05-16-2012 | 11:12 PM
#46
Members
Joined: Apr 2012
Posts: 25
Likes: 0
From: Sweden
My Ride: E61 535D LCI Hybrid CPM Performance Stage 3
Model Year: 2007
So, the 35d injectors were installed yesterday, and remapping + dynoing done as well. What can I say, I'm very pleased with the results .
My car is equipped with a manual gearbox, therefore the highest possible power and especially torque numbers were NOT tickled out.
However, from this we started (OEM) and achieved this:
- 218hp (engine power) --> 326whp (Note! WHEEL horse power)
- 500Nm/369 lb/ft (from the engine) --> 666Nm/491 lb/ft (from the wheels)
.My car is equipped with a manual gearbox, therefore the highest possible power and especially torque numbers were NOT tickled out.
However, from this we started (OEM) and achieved this:
- 218hp (engine power) --> 326whp (Note! WHEEL horse power)
- 500Nm/369 lb/ft (from the engine) --> 666Nm/491 lb/ft (from the wheels
)Woohaaa, Are you saying that your only mods are 35d injectors?!? + remap?
What are you engine/tourque figures? 350++/700++ ? Is the clutch stock and how is it holding up?
05-17-2012 | 10:57 AM
#47
Thread Starter
Contributors
Joined: Apr 2007
Posts: 5,851
Likes: 3
From: Kajaani, Finland
My Ride: Bmw 530d 2004
I don't know the engine figures, and I doubted the numbers too, but the builder/owner/programmer of the dyno told me that his dyno doesn't make any calculations to determine the engine power/torque. The dyno has been tested and calibrated with some stock cars. That's everything I can tell about it, I don't know more. However, I'm very pleased with the results.
- Antti -
08-24-2012 | 01:27 PM
#49
Thread Starter
Contributors
Joined: Apr 2007
Posts: 5,851
Likes: 3
From: Kajaani, Finland
My Ride: Bmw 530d 2004
I used the usual solenoid injectors because piezo injectors can not be fitted in a 218bhp engine. My injectors came from the factory, but through a Finnish contact. He's an individual guy so sorry can't give his contact information.
- Antti -
- Antti -
