Vibration driving at idle only
#1
New Members
Thread Starter
Join Date: Aug 2022
Location: France
Posts: 54
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: E60 520da luxury
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hello all,
So, start of problems with my e60 with 57 000 kms. While driving if I put the automatic gearbox in neutral the car vibrates a lot, and it's the same vibration at any speed higher than 30kph.
The same happens in D if the gearbox goes at 800rpm. The gearchanges are nice and sweet, always at the right time.
The steering wheel seems to be vibrating too from times to time, acceleration/cruise/braking. The front axle have been checked recently everything is fine.
I don't know where to look. Stopped, at idle, the engine seems to be vibrating, the air intake vibrates too which seems not normal.
Any clue ?
Thanks for any help,
Matt
So, start of problems with my e60 with 57 000 kms. While driving if I put the automatic gearbox in neutral the car vibrates a lot, and it's the same vibration at any speed higher than 30kph.
The same happens in D if the gearbox goes at 800rpm. The gearchanges are nice and sweet, always at the right time.
The steering wheel seems to be vibrating too from times to time, acceleration/cruise/braking. The front axle have been checked recently everything is fine.
I don't know where to look. Stopped, at idle, the engine seems to be vibrating, the air intake vibrates too which seems not normal.
Any clue ?
Thanks for any help,
Matt
Last edited by Matouti; 08-01-2022 at 12:20 PM.
The following users liked this post:
dan_a (08-01-2022)
#3
New Members
Thread Starter
Join Date: Aug 2022
Location: France
Posts: 54
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: E60 520da luxury
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hey thanks for the answer
I am surprised engine mount would fail at this low mileage but it's rubber after all
I noticed that the engine moves quite a bit when shifting between R and D
Would a bad engine mount make my steering wobble on uneven roads and breaking ? I noticed that recently
the front brakes and suspensions have been checked my a mechanics and they're fine apparently (safety controls)
Thanks for the help!
I am surprised engine mount would fail at this low mileage but it's rubber after all
I noticed that the engine moves quite a bit when shifting between R and D
Would a bad engine mount make my steering wobble on uneven roads and breaking ? I noticed that recently
the front brakes and suspensions have been checked my a mechanics and they're fine apparently (safety controls)
Thanks for the help!
#4
Super Moderator
![](https://5series.net/forums/images/ranks/veteran_army.png)
Join Date: Jul 2011
Location: Augusta, GA
Posts: 3,611
Likes: 0
Received 316 Likes
on
303 Posts
My Ride: 05 530i M54
Model Year: 05 530i
Engine: 3.0 M54
![Default](https://5series.net/forums/images/icons/icon1.gif)
Check your transmission fluid level. It will cause what you're explaining if it's low. Also check your plugs and for vacuum leaks. Those are the only things I can see why it's vibrating at idle other than motor or transmission mounts
Last edited by seanjordan20; 08-03-2022 at 01:42 PM.
#5
New Members
Thread Starter
Join Date: Aug 2022
Location: France
Posts: 54
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: E60 520da luxury
![Default](https://5series.net/forums/images/icons/icon1.gif)
I'll check the transmission fluid level.
You mean check the heater plugs? You thing it looses compression?
What I find weird is that this issue is only idle rpm while driving.
Thanks again, I'll start by checking engine/transmission mounts asap
#6
New Members
Thread Starter
Join Date: Aug 2022
Location: France
Posts: 54
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: E60 520da luxury
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hello,
So, I am changing engine mounts
However on the 520d the one on the right side is terribly hard to access. I have no point to put the jack on from under
And from the front compartment I can't reach the screws
Does anyone has any idea how is it supposed to be removed?
So, I am changing engine mounts
However on the 520d the one on the right side is terribly hard to access. I have no point to put the jack on from under
And from the front compartment I can't reach the screws
Does anyone has any idea how is it supposed to be removed?
#10
New Members
Thread Starter
Join Date: Aug 2022
Location: France
Posts: 54
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: E60 520da luxury
![Default](https://5series.net/forums/images/icons/icon1.gif)
The one in the back is hard to reach, and I cannot catch the mount to put the new one in
I have removed some ducts and cables but more than that would be cooling pipes and it just doesn't seem right