power window anti-trap function fault is showing up. drivers side front window wont roll up automatically(holding button) but it will automatically roll down. all other windows are fine.

 

Pull power window switch to roll that window all the way up, release it, and pull it again. It might cure the problem. Please let all us know if it solve the problem. It worked on mine

 

I recently had my Aux audio jack put in and the car was given back to me with this problem. I quickly brought the SA's attention to it, and all he did was sit inside the car, close all doors, turn on the electronics (not the ignition), and roll down driver's side window, "tap" it back up (tap = partially roll up, stop 1/5 of the way, partially roll up again, stop 2/5 of the way, etc.). He did this next to driver's side rear, passenger side rear, and finally passenger side.

The "anti-trap feature disabled" warning was off.

I thought it was the most idiotic service in my life.

 

What would BMW SA think of next ? Shut down all the "WINDOW" and reboot !

 

My SA told me how to do it the last time I was there. (They forgot to reset it and they were buried).

He said to lower the window by using the button (not one-touch) and hold it down for 10 seconds then raise the window again by holding the button and continue to hold it for 10 seconds.

I did it and my error message went away.