Painting the interior trim?
Thread Starter
Members
Joined: May 2010
Posts: 55
Likes: 0
From: Island Of Korcula - Croatia
My Ride: E60 535d M
e61 530d
Iron Horse Sunday :-)
I'm getting bored with my wood interior trim. I was thinking of taking it all out and give it to some goooood paiter to paint it glossy black.
Has anyone done something like that?
Has anyone done something like that?
Contributors
Joined: Jun 2007
Posts: 286
Likes: 0
From: Los Angeles
My Ride: 2004 545
Model Year: 2004
Contributors
Joined: Dec 2008
Posts: 824
Likes: 0
From: dallas, tx
My Ride: e60
ill be doing just what ur talking about in a week or 2
...but i ofcourse got some donor pieces from another car so if i need to turn it back i can
if ur willing to wait a bit ill post pics when im finished
ps...
i did try vinyl first but egh...
just doesnt give the same feel as freshly painted clear coated smooth paint
...but i ofcourse got some donor pieces from another car so if i need to turn it back i can
if ur willing to wait a bit ill post pics when im finished
ps...
i did try vinyl first but egh...
just doesnt give the same feel as freshly painted clear coated smooth paint
Banned
Joined: Apr 2009
Posts: 859
Likes: 2
It can be done but you have to be real patient and careful. I did it with spray paint-acrylic black gloss laquer with a clear laquer over top.
Some tpis I learned as I went when I had to redo panels was my spray tecnique was too far way and it was not covering in a completely smooth perfectly black pattern that looks professional.
1.Run your can after shaking it under hot water for 30 seconds or so and shake in between-this makes the paint have an even finer mist which makes for an even nicer even layer of thin coats.
2.Apply the paint quite wet and close to the panel-I sprayed within six inches or less and put pretty wet coats on-that way it dryed nice and mirror like-This saves you from having to wet sand and polish when yoru done-this creates a paint job that looks like the exterior jet black. I found wet sanding a high gloss black invetivbly left minor scratches and scuffs-wet coat painting made for a clear mirror finish without sanding or buffing.
3. Make sure you sand the wood VERY well-any glossy spots and the paint wont stick--good good sanding
Some tpis I learned as I went when I had to redo panels was my spray tecnique was too far way and it was not covering in a completely smooth perfectly black pattern that looks professional.
1.Run your can after shaking it under hot water for 30 seconds or so and shake in between-this makes the paint have an even finer mist which makes for an even nicer even layer of thin coats.
2.Apply the paint quite wet and close to the panel-I sprayed within six inches or less and put pretty wet coats on-that way it dryed nice and mirror like-This saves you from having to wet sand and polish when yoru done-this creates a paint job that looks like the exterior jet black. I found wet sanding a high gloss black invetivbly left minor scratches and scuffs-wet coat painting made for a clear mirror finish without sanding or buffing.
3. Make sure you sand the wood VERY well-any glossy spots and the paint wont stick--good good sanding
Members
Joined: May 2009
Posts: 46
Likes: 0
From: midlands uk
My Ride: BMW 530d, AC front lip, AC rear boot spoiler, AC rear roof spoiler, M6 alloy wheels.
Members
Joined: Mar 2008
Posts: 216
Likes: 0
From: Sweden
My Ride: 2006 Audi A8 4.2TDI
Previous rides:
2005 E61 530d, 20" Breyton reps, Eibach springs, M5 bumper/mirrors/MFSW
2000 Audi S6 Avant, 18" OZ, RS6 exhaust etc
1998 Audi A8 4,2Q, 19" RS4 wheels, Remus exhaust KW coilovers etc
1986 Audi 100CC, funky fresh steel rims w plastic covers, rubber lip on boot.....
1987 BMW 320i, 15" alloys + rubber lip on boot :)
1982 Opel Ascona 1,6DL, tinted windows and a big-ass subwoofer :P
I had it done at my local paint shop for 200 bucks (10 different trim parts) incl fixing of a few chips/scratches
