car still in shop
03-27-2006, 07:17 AM
#1
Senior Members
Thread Starter
Join Date: Apr 2004
Location: Richmond Va
Posts: 752
Received 0 Likes
on
0 Posts
My Ride: Numero Uno in Richmond Va 04 530 6 speed, jet black, black dakota leather, xenons, red rear reflectors, 545 front grill, cold weather package, premium package, staggered 19 inch BBS rxII/michelins, H&R coilovers and intergrated, R1 concept drilled an
Model Year: 2004
Engine: 530i
Going on three weeks without my car, haveing the btum software updated and it fried my rear passenger one touch the techs then completly destroyed the window motor. And of course the part is on back order release date set for April 3 so it maybe another 2 weeks before i get my baby back. I do have an 06 330i nice car but not in the class of the e60 i am starting to grow tired of the on and off sensation of the throttle and just starting to really get use to the brakes that seem to grab immediatley. Double Vanos is great feels like it has a turbo or something, but i really do like the start stop button and the logic 7 i wish i could retro this into my car. Did anyone else have a onetouch problem when they installed the BTUM?
03-27-2006, 05:13 PM
#3
Senior Members
Join Date: Nov 2005
Location: Albany, NY
Posts: 1,113
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: '04 545iS 6 spd, bought new via eBay, 11/05; Blk/Gry, Cold, L7, PDC, BMW Rear seatcover for pets.
First "Bumwa" was a new 1971 2002. High performance 5s since 1987. Beamer motorcycles too, currently on an 07 BMW K1200 GT; also a Moto Guzzi 1000 SP III.
To me, this is unacceptable; loaner or not. What the hell are they doing (or not doing?) :thumbsdown:
jeers,
Ray Hull
jeers,
Ray Hull
03-28-2006, 03:56 PM
#4
Senior Members
Thread Starter
Join Date: Apr 2004
Location: Richmond Va
Posts: 752
Received 0 Likes
on
0 Posts
My Ride: Numero Uno in Richmond Va 04 530 6 speed, jet black, black dakota leather, xenons, red rear reflectors, 545 front grill, cold weather package, premium package, staggered 19 inch BBS rxII/michelins, H&R coilovers and intergrated, R1 concept drilled an
Model Year: 2004
Engine: 530i
Tell me about it Ray Hull, A very bad inconvience however he did tell me that i could come and get the car but i am like why, because when the part comes in i will just have to come back leave the car and wait again so they still have it and the part should be realesed on April 3, i rally wish they had did plug and play installs on this darn car. By the way i cant reset the tire pressure on the e90 i can get to the icon and it says init but wont reset. COmpared to the idrive the way to navigate the menues are horrendous i drive rocks compared to all the buttons and toggles you have to go thru just to set the time of even the dash lights intensity.
03-28-2006, 04:16 PM
#5
Senior Members
Join Date: Nov 2005
Location: Albany, NY
Posts: 1,113
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: '04 545iS 6 spd, bought new via eBay, 11/05; Blk/Gry, Cold, L7, PDC, BMW Rear seatcover for pets.
First "Bumwa" was a new 1971 2002. High performance 5s since 1987. Beamer motorcycles too, currently on an 07 BMW K1200 GT; also a Moto Guzzi 1000 SP III.
I just reread your original. Do you mean the rear windows "one touch" auto up/down? I lost ALL UP one-touch window action (down OK). I figured I'd "raise" it when I bring it back, as the "Electronic System" warning is happening again, and that's what we were aiming to cure. The BTUM was just gravy, and is performing fine. 
Ray Hull
Ray Hull
03-28-2006, 05:23 PM
#6
Senior Members
Thread Starter
Join Date: Apr 2004
Location: Richmond Va
Posts: 752
Received 0 Likes
on
0 Posts
My Ride: Numero Uno in Richmond Va 04 530 6 speed, jet black, black dakota leather, xenons, red rear reflectors, 545 front grill, cold weather package, premium package, staggered 19 inch BBS rxII/michelins, H&R coilovers and intergrated, R1 concept drilled an
Model Year: 2004
Engine: 530i
Yeah Ray the one touch for all windows failed they got all the others working except the rear passenger, and upon continueing to work on it they fried the complete motor and that is what is on back order i am not sure is they are seperate modules that do the work or just a reley, It must be something withe ver 20. Did you have the problem before the BTUM upgrade or after?
Thread
Thread Starter
Forum
Replies
Last Post
BrandonSS
Private Member Classifieds
4
03-30-2015 09:48 AM