Bmw e60 520d - Gamble [ need help ]
#1
New Members
Thread Starter
Join Date: Sep 2013
Location: Romania
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW E60 525D
Bmw e60 520d - Gamble [ need help ]
Hello my new friends
Because this is my first post here i would like to thank you all for letting me in your group
Now my story, bought a BMW E60 2007 520D from auction with NO KEYS and i did see the backseat raised and that they were doing something at the in tank fuel pump.
I changed a few in tank fuel pumps on previous e60 and i considered it was no problem.
Won the car, called a guy who made me a new key in just 30 mins.
The car battery was flat, got a new Bosch Car Battery 12V 80Ah Type 110 720CCA.
And now this happens when i try to start the car:
( i made a video of the problem )
My main problem is that i can't get the ignition to light up in the dashboard .. ( as seen in the video )
Using the ISTA-D ( DIS ) software i diagnosed the problems , that is what came up in different clearing and reading of the fault codes.
If any of you guys could help me out, i would appreciate very much
Because this is my first post here i would like to thank you all for letting me in your group
Now my story, bought a BMW E60 2007 520D from auction with NO KEYS and i did see the backseat raised and that they were doing something at the in tank fuel pump.
I changed a few in tank fuel pumps on previous e60 and i considered it was no problem.
Won the car, called a guy who made me a new key in just 30 mins.
The car battery was flat, got a new Bosch Car Battery 12V 80Ah Type 110 720CCA.
And now this happens when i try to start the car:
My main problem is that i can't get the ignition to light up in the dashboard .. ( as seen in the video )
Using the ISTA-D ( DIS ) software i diagnosed the problems , that is what came up in different clearing and reading of the fault codes.
If any of you guys could help me out, i would appreciate very much
Last edited by adrcostel; 03-14-2017 at 11:52 AM.
#4
Super Moderator
Join Date: Jul 2011
Location: Augusta, GA
Posts: 3,628
Likes: 0
Received 318 Likes
on
305 Posts
My Ride: 05 530i M54
Model Year: 05 530i
Engine: 3.0 M54
That is not being programmed. It needs to be programmed to start the car. If you didnt take it to a dealer or hook a computer up with BMW software to program the imobilizer then all you will be able to do is lock and unlock the car.
Last edited by seanjordan20; 03-15-2017 at 03:05 PM.
#6
Super Moderator
Join Date: Jul 2011
Location: Augusta, GA
Posts: 3,628
Likes: 0
Received 318 Likes
on
305 Posts
My Ride: 05 530i M54
Model Year: 05 530i
Engine: 3.0 M54
No you cant. I dont think ISTA P can do any programming. If you had the original key you could do it yourself easily. Was the FOB new or used. You probably could take it back to him to see if he could do it but if the FOB was used it would have to be flashed first. There are DIY threads but none them are consistent. You might need to take it to an INDY or dealership to get it done.
#7
Senior Members
Join Date: Oct 2009
Location: Indiana, USA
Posts: 1,380
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2007 530xi: Sport, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, HD Radio, SAT, Custom NCS coded options 2008 535xi: Sport, Night Vision, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, SAT, Custom NCS coded options, Rear Seat Heat Retrofit, Passport 9500ci
Model Year: 2008
Engine: N54
Agreed.
You got a good deal on this car I'm sure.
Don't fight the key problem and any issues that come from it. Be assured you have a proper key and pay the Dealer their rate to get it done.
You got a good deal on this car I'm sure.
Don't fight the key problem and any issues that come from it. Be assured you have a proper key and pay the Dealer their rate to get it done.
#8
New Members
Thread Starter
Join Date: Sep 2013
Location: Romania
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW E60 525D
I did found the problem.
It`s the CAS module not sending a 'OK' signal to the engine, not even locking/unlocking the steering wheel.
It may appear damaged.
I am going to buy it now from ebay, anyone could guide me thru the coding process ? Could it be done with ISTA D/P ?
It`s the CAS module not sending a 'OK' signal to the engine, not even locking/unlocking the steering wheel.
It may appear damaged.
I am going to buy it now from ebay, anyone could guide me thru the coding process ? Could it be done with ISTA D/P ?
#10
New Members
Thread Starter
Join Date: Sep 2013
Location: Romania
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW E60 525D
The CAS is no longer responding
I just talked with someone that will program a used cas for my car.
In a week from now i hope to have it
I just talked with someone that will program a used cas for my car.
In a week from now i hope to have it