Beginner to ISTA-P and it wants to make 6 hour long changes.. advice plz?
#1
New Members
Thread Starter
Join Date: Aug 2018
Location: Ottawa
Posts: 61
Received 0 Likes
on
0 Posts
My Ride: 535i M / X-Drive
Model Year: 2010
Engine: N54
Beginner to ISTA-P and it wants to make 6 hour long changes.. advice plz?
Hi every1,
another noob that’s in love with this amazing ‘10 535i X-Drive M-Sport E60, but just can’t seem to find any peace of mind from the problems I keep encountering left and right lol.. so I got insta-p installed and the first thing it tries to do right away after I connect to my car, is do an insane amount of “re-writes” (I assume that’s what most of it is?) and a long a** list of “changes” that all comes down to OVER 6 hours long as the overall ETA for the job(S)???
it’s a long LONG list lol, but I’ve attached all the screenshots for it if any1 wants to be solid enough to help me understand it all/or maybe just some of it lol? I chickened out of course and cancelled it, but if any1 knows what it all is, then I’ll def proceed with it(if that’s the recommendation Lool)..
now keep in mind, I messed around with a lot of the coding using ProTools to try and code Enhanced Bluetooth and might of messed up several little things along the way, including a few of the VO “raw coding” which I’m hoping I reverted back to original though.. any1 that has the patience and brains to help me out a little, I’d really really appreciate it I’m a quick learned so I’ll learn this stuff super fast eventually :$ thank u in advance !!!
another noob that’s in love with this amazing ‘10 535i X-Drive M-Sport E60, but just can’t seem to find any peace of mind from the problems I keep encountering left and right lol.. so I got insta-p installed and the first thing it tries to do right away after I connect to my car, is do an insane amount of “re-writes” (I assume that’s what most of it is?) and a long a** list of “changes” that all comes down to OVER 6 hours long as the overall ETA for the job(S)???
it’s a long LONG list lol, but I’ve attached all the screenshots for it if any1 wants to be solid enough to help me understand it all/or maybe just some of it lol? I chickened out of course and cancelled it, but if any1 knows what it all is, then I’ll def proceed with it(if that’s the recommendation Lool)..
now keep in mind, I messed around with a lot of the coding using ProTools to try and code Enhanced Bluetooth and might of messed up several little things along the way, including a few of the VO “raw coding” which I’m hoping I reverted back to original though.. any1 that has the patience and brains to help me out a little, I’d really really appreciate it I’m a quick learned so I’ll learn this stuff super fast eventually :$ thank u in advance !!!
#2
Super Moderator
Join Date: Jul 2011
Location: Augusta, GA
Posts: 3,600
Likes: 0
Received 312 Likes
on
299 Posts
My Ride: 05 530i M54
Model Year: 05 530i
Engine: 3.0 M54
Looks like a lot of modules have been changed. It seems like the CIC retrofit was done so I wouldn't update that. What all has been done to the car it is calculating a lot of changes. Was this car a project car. Almost none of the original modules are there. Can the car even crank? What does the modules look like in the tree I'm sure a lot of red?
#4
New Members
Thread Starter
Join Date: Aug 2018
Location: Ottawa
Posts: 61
Received 0 Likes
on
0 Posts
My Ride: 535i M / X-Drive
Model Year: 2010
Engine: N54
Looks like a lot of modules have been changed. It seems like the CIC retrofit was done so I wouldn't update that. What all has been done to the car it is calculating a lot of changes. Was this car a project car. Almost none of the original modules are there. Can the car even crank? What does the modules look like in the tree I'm sure a lot of red?
#5
New Members
Thread Starter
Join Date: Aug 2018
Location: Ottawa
Posts: 61
Received 0 Likes
on
0 Posts
My Ride: 535i M / X-Drive
Model Year: 2010
Engine: N54
#6
New Members
Thread Starter
Join Date: Aug 2018
Location: Ottawa
Posts: 61
Received 0 Likes
on
0 Posts
My Ride: 535i M / X-Drive
Model Year: 2010
Engine: N54
Looks like a lot of modules have been changed. It seems like the CIC retrofit was done so I wouldn't update that. What all has been done to the car it is calculating a lot of changes. Was this car a project car. Almost none of the original modules are there. Can the car even crank? What does the modules look like in the tree I'm sure a lot of red?
#7
Super Moderator
Join Date: Jul 2011
Location: Augusta, GA
Posts: 3,600
Likes: 0
Received 312 Likes
on
299 Posts
My Ride: 05 530i M54
Model Year: 05 530i
Engine: 3.0 M54
I'm looking at the modules not matching up. It's seeing that some modules have been switch and calculating replacement. In another pic it calculated updating to the latest iLevel. Did you try to run it already. Looks like some stuff failed. Either way if you're not doing it by ICOM do not attempt it. Also you need a battery regulator to keep the voltage at 13.4v. Looking at all the pics it's fixing whatever has been done wrong, aligning VO, updating all modules and removing the one module it does not see. Also resetting a few parameters. It looks good to me but I repeat do not attempt without ICOM. That's probably why I'm seeing failures in your pics because you are trying to do it with a k/Dcan cable. You can choose what you want it to do.
Last edited by seanjordan20; 07-28-2021 at 01:17 PM.
#8
New Members
Thread Starter
Join Date: Aug 2018
Location: Ottawa
Posts: 61
Received 0 Likes
on
0 Posts
My Ride: 535i M / X-Drive
Model Year: 2010
Engine: N54
I'm looking at the modules not matching up. It's seeing that some modules have been switch and calculating replacement. In another pic it calculated updating to the latest iLevel. Did you try to run it already. Looks like some stuff failed. Either way if you're not doing it by ICOM do not attempt it. Also you need a battery regulator to keep the voltage at 13.4v. Looking at all the pics it's fixing whatever has been done wrong, aligning VO, updating all modules and removing the one module it does not see. Also resetting a few parameters. It looks good to me but I repeat do not attempt without ICOM. That's probably why I'm seeing failures in your pics because you are trying to do it with a k/Dcan cable.
#10
New Members
Thread Starter
Join Date: Aug 2018
Location: Ottawa
Posts: 61
Received 0 Likes
on
0 Posts
My Ride: 535i M / X-Drive
Model Year: 2010
Engine: N54
ya I’m gonna buy a battery charger to do whatever needs to be done.. can I ask u something then? I’m not looking to spend so much on just the cable right now when I have to spend on injectors, coils, spark plugs AND the water pump.. so not sure what to do here lol but is it true That I can apparently just program each module individually, and using a kdcan cable running WinKFP instead.. and get away with it? Plus it apparently beats the 6 and a half hour eta ISTA-P wants lol? But I’m inexperienced in this area/field, so I’m hoping someone more experienced, like yourself, can guide me on this