License Plate Lamp DIY!!
Thread Starter
Banned
Joined: Jun 2008
Posts: 7,983
Likes: 1
From: Queens, NY
My Ride: A Car
This is a DIY on how to install License Plate Lamps. Also perfect for switching out bulbs! 
Please PM, text, or call me to buy the items.
Difficulty : EASY
Time Needed : < 5 minutes. SERIOUSLY!!
Tools : Your BMW screwdriver
First, open your trunk and get thr screwdriver. Put the screwdriver in the slot.
Now hold the screwdriver STILL and push the screwdriver to the right. Make sure the screwdriver STAY perpendicular with the license plate light housing
While holding the light housing to the right, take your left hand fingernails and carefully pry down the license plate light housing.
Push the light back to the LEFT AFTER it has been pryed down and the housing should fall down with ease.
Please PM, text, or call me to buy the items.Difficulty : EASY
Time Needed : < 5 minutes. SERIOUSLY!!
Tools : Your BMW screwdriver
First, open your trunk and get thr screwdriver. Put the screwdriver in the slot.
Now hold the screwdriver STILL and push the screwdriver to the right. Make sure the screwdriver STAY perpendicular with the license plate light housing
While holding the light housing to the right, take your left hand fingernails and carefully pry down the license plate light housing.
Push the light back to the LEFT AFTER it has been pryed down and the housing should fall down with ease.
Thread Starter
Banned
Joined: Jun 2008
Posts: 7,983
Likes: 1
From: Queens, NY
My Ride: A Car
Unplug the housing.
Repeat on other side
A look at the beautiful license plate lamps!!
There are two plugs. If you have an e9X with factory LEDs, you plug into the small hole. E60, plug into big hole. It's all plug and play.
Now push it back it and it should fit snug. Might want to push the lamp to the left to make sure it's secure.
Installed!
Thread Starter
Banned
Joined: Jun 2008
Posts: 7,983
Likes: 1
From: Queens, NY
My Ride: A Car
This is a DAYTIME pic!!!! Look at the reflection!
Below are a few pix:
Difference between regular LEDs and my License plate LAMPS!
Installed:
Look at the light on the floor!!!
Below are a few pix:
Difference between regular LEDs and my License plate LAMPS!
Installed:
Look at the light on the floor!!!
Thread Starter
Banned
Joined: Jun 2008
Posts: 7,983
Likes: 1
From: Queens, NY
My Ride: A Car
And a couple pix of WHY you should not be an idiot and leave resistors on the stock license plate housing. COURTESY OF EU##NE134OF COURSE!!!! WILL BE POSTED ELSEWHERE AS WELL!! 
Contributors
Joined: Mar 2009
Posts: 10,301
Likes: 0
From: New York, New York
My Ride: See my signature
Originally Posted by king1828' post='983097' date='Aug 20 2009, 07:21 AM
can u teach me how to change the light blub in my bathroom 
Contributors
Joined: Sep 2007
Posts: 7,053
Likes: 0
From: Jersey
My Ride: 2004 530i
Model Year: 2004
Originally Posted by brabusw209amg' post='981494' date='Aug 18 2009, 10:47 PM
And a couple pix of WHY you should not be an idiot and leave resistors on the stock license plate housing. COURTESY OF EU##NE134OF COURSE!!!! WILL BE POSTED ELSEWHERE AS WELL!!
Attachment 87564
Attachment 87565
Attachment 87566
Attachment 87564
Attachment 87565
Attachment 87566
Damn. Why would anyone set a resistor on plastic like that?
Contributors
Joined: Sep 2007
Posts: 7,053
Likes: 0
From: Jersey
My Ride: 2004 530i
Model Year: 2004
Originally Posted by king1828' post='983097' date='Aug 20 2009, 07:21 AM
can u teach me how to change the light blub in my bathroom
Its a trap. Don't fall for it.
Thread
Thread Starter
Forum
Replies
Last Post
Vman33
Complete Car Sales
5
Mar 14, 2022 04:43 AM
bestofthebest
Complete Car Sales
4
Mar 28, 2016 02:47 PM
DetailersDomain
Detailing Forum
0
Sep 22, 2015 03:59 PM