Jnelson1182

I have a 04 525 with option SA430 but the only thing I can say for sure that is active is the pass side auto dipping feature when shifting into reverse, I have used ncs to activate folding mirrors but wither the code isn't saving to the mod or I sm doing something wrong when it comes to the coding?

Bugs

Hi I have a 06 non memory seats push button start I had four wires on mine originally but got pre LCI folding mirrors with looms and modules then found out they was no good so I got some newer ones with three wires and looms I believe off a 07_08 ish .I have changed them all and coded them in with NCS expert the new looms also have the three wires. The drivers mirror works out wrong with the button as as up comes in in goes down down goes out out goes up or something like that. The passenger side doesn't work at all. And the mirror does not move in The windows work. Is there something else I need to do or rewire. Any help would
Be great thanks in advance

Bugs

Hi I'm in the middle of doing mine done all wiring and done the codding as you tube but I keep seeing threads about adding sa430 to the vo how is this done I can't see anything anywhere thanks for any help

Bugs

Up date I've coded $430 to vo but still no goog

Bugs

Up date I've run wires from passenger side mirror the Lin bus one to kgm positon 14 and the live to position 7 on the back of the blue fuse block. The passenger mirror also moves out of sequence. But still nether mirror moves in. Also some times I come back to the car and the drivers side switch doesn't work for anything all the other switches on doors do. But if I disconnect the battery and reconnect it will reset it's self any ideas mirrors are 08 switch has a code 6 951 924 on the back I take it as it is just a switch it should be ok

jcalcedo

Hi. In my E60 LCI (production date may 2009) with basic mirrors, they have a 3 cables (red in pin 1, green in pin 2 and brown in pin3) in a four pin connector. The SA430 mirrors I got from eBay were manufactured a couple months later (sep 2009) and feel heavier than the old ones and also have 3 cables. With my basic mirrors I control vertical and horizontal movements from the door switch and also have the passenger side tilt in reverse. After coding adding $430 to FA to both CAS and LMA modules and making active all of this:
BEIKLAPPEN_B_KONFORTSCHL (KGM)
ASP_BEIKLAPPEN (KGM)
ASP_LIN_SPIEGEL (KGM)
KOMFORTOEFFNUNG (CAS)
KOMFORTOEFFNUNG_FB (CAS)
KOMFORTSCLIESSUNG (CAS)
the new mirrors get moved from the switch horizontally, vertically from door switch and passenger side tilt in reverse.
No folding at all with keyfob. I can close door and windows by keeping pressed the close button on the keyfob but no mirror folding.
Any help on this would be really appreciated

jcalcedo

With Carly I get this errors:
0093B7 Drive folded in mirror passenger side defective
0093B4 Drive folded in mirror driver side defective

jcalcedo

At the very end, the problem was defective mirrors bought from eBay dealer