Hi Guys,

Just need some instructions/advice on changing the brake discs(rotors), pads and sensors as i am going to do it first time myself on my E60 M sport 525D. Is there any instruction manual that someone can provide me with, that includes all the step by step instructions.

THANKS!

 

I done it and will not do it again, just too much work.
it only cost about $38us each wheel to do all this in HK

 

Front, back, or both?

 

is that your installed price?

 

I did it took me about 3 hours brakes rotors front and rear. I brought R1 concept cross drilled and slotted rotors and Akibono ceramic brake pads. It is not a hard job if you have jack stands and a floor jack. total cost was about 800.00 which broke down comes to 540 for rotors and about 180.00 for pads.

Love the ceramic pads not a bit of dusting not a bit of fade and not abit of noise. Awsome brakeing and they look good also

 

most likely the installation price because part price is much much more than that ....

 

I tried doig them myself and i removed all 3 bolts and the darn thing wouldn't come out, anyone have the TIS file that tells you how to do it, im not sure if maybe im missing a step.

 

anyone have a DIY on this, I need to replace my front brakes pads! any help would be greatly appreciated. thanks in advance.

I have changed mutliple Makes of other cars, almost certain its the same concept. If there are any tips, please let me know.

and do you just replace the brake sensor?

 

M5 brakes Install
Hope this helps. Good luck

 

Ordered a new sensor for $14 online. was gunna do the twist wire trick, but that still requires removal of the stupid wheel, so Im just gunna stick a new sensor on.