AC basic to AC high retrofit DIY rev.3
01-28-2018 | 04:10 PM
#141
New Members
Joined: Jan 2018
Posts: 2
Likes: 1
From: serbija
My Ride: BMW
I do not have a problem with the fan, I saw some members that they had a problem with the fan that they did it to the maximum, I did not have such a problem
everything worked okay
I have a problem when I return the keys to the minimum, it also blows hot air
everything worked okay
I have a problem when I return the keys to the minimum, it also blows hot air
The following users liked this post:
Ardit (05-13-2021)
03-24-2018 | 02:56 AM
#142
New Members
Joined: Mar 2018
Posts: 1
Likes: 0
From: Poland
My Ride: BMW E60
Model Year: 2004
Hello. I made this retrofit but have one question. What gives additional solar sensor? I already had one, it brightens clocks and new ac high panel in tunels etc. Whats the point in adding second one?
03-24-2018 | 03:28 AM
#143
New Members
Joined: Dec 2016
Posts: 42
Likes: 0
From: Shrewsbury
My Ride: E60 530D
Model Year: 2006
The solar sensor you are talking about measures light so it knows when its getting dark to switch on the auto lights etc.
The solar sensor mentioned here detects the heat of the suns rays projected through the windscreen and adjusts the A/C to compensate
The solar sensor mentioned here detects the heat of the suns rays projected through the windscreen and adjusts the A/C to compensate
01-07-2019 | 11:12 AM
#144
New Members
Joined: Jun 2015
Posts: 3
Likes: 0
From: germany
My Ride: bmw e60 530i lpg
hello together a happy new year I wish you together. I write with a translator that's why the sentences are. I have a question is the description of BLooD for conversion from old to new what I have on foto ??
Last edited by darian81; 01-07-2019 at 11:21 AM.
11-21-2019 | 06:19 AM
#147
Probation Members
Joined: Aug 2019
Posts: 1
Likes: 0
From: Bulgaria
My Ride: BMW E60 530D manual
Ok. Onem ore with problem. Changed non LCI high IHKA to LCI high IHKA. Moded pin 21, updated software of the ihka with WINkfp and changed VIN to corect one, coded module to car VO list. Everithing works and looks perfect. Only one error - https://photos.app.goo.gl/JoJudNyU9MLd2KQ87
E720 message error (status solar sensor ... ) my solar sensor is in mid speaker grill, LCI one is in RLS sensor on the mirror. Any solution?
E720 message error (status solar sensor ... ) my solar sensor is in mid speaker grill, LCI one is in RLS sensor on the mirror. Any solution?
02-16-2020 | 11:21 AM
#148
New Members
Joined: Mar 2015
Posts: 8
Likes: 1
From: harlow Essex
My Ride: e60 pre lci 530d M-sport carbon black
Hi blood, sorry to bring this back from the dead.... Again. I have fitted pre lci high from pre lci basic. It all works but I just need coding. Is this something you could do for me, I amin essex as well (big place I know) but I don't mind travelling. Will the coding allow me to adjust vent positions as I can no longer adjust to feet etc.
The following users liked this post:
Ardit (05-13-2021)
05-13-2021 | 04:40 PM
#150
New Members
Joined: May 2021
Posts: 8
Likes: 0
From: Albania
My Ride: Bmw e60 525d automatic
blue 26 pin connector (X1527)
PIN No. Description Colour Gauge
1 - Signal, LIN BUS Blower Motor Output Stage Blue/Red 0.5
2 – Supply, AUC Sensor White/Red 0.5
3 - Signal, AUC Sensor Grey/Brown 0.5
4 - Supply, Condensation(Fogging) Sensor Blue/Yellow 0.5
5 - Signal, Condensation(Fogging) Sensor Blue/Grey 0.5
6 - Signal, CAN Bus System High Black 0.5
7 - Signal, CAM Bus System Low Yellow 0.5
8 - Supply, Refrigerant Pressure Sensor Grey/Black 0.5
9 - Signal, Refrigerant Pressure Sensor Blue/Black 0.5
10 - ------------- ----
11 - ------------- ----
12 - ------------- ----
13 - ------------- ----
14 - Signal, Electric Auxiliary Heater White 0.35
15 - Signal, AC Compressor, Pulse Width Modulated Black/Green 0.75
16 - Signal, Water Valve Left Yellow/Brown 0.5
17 - Signal, Water Valve Right Yellow/Purple 0.5
18 - Signal, Auxiliary Water Pump Green 0.5
19 - Signal, Rear Window Defroster Grey/Black 0.35
20 - Signal, Washer Jets Heater Green/Black 0.5
21 - Signal, AC Compressor Control Valve White/Green 0.75
22 - Supply, Rear Compartment Potentiometer White/Green 0.5
23 - Signal, Rear Compartment Potentiometer White/Blue 0.5
24 - Signal, Ventilation Temperature Sensor Blue 0.5
25 - Ground, Control Panel Brown 0.5
26 - Ground, Rear Compartment Potentiometer White/Brown 0.5
PIN No. Description Colour Gauge
1 - Signal, LIN BUS Blower Motor Output Stage Blue/Red 0.5
2 – Supply, AUC Sensor White/Red 0.5
3 - Signal, AUC Sensor Grey/Brown 0.5
4 - Supply, Condensation(Fogging) Sensor Blue/Yellow 0.5
5 - Signal, Condensation(Fogging) Sensor Blue/Grey 0.5
6 - Signal, CAN Bus System High Black 0.5
7 - Signal, CAM Bus System Low Yellow 0.5
8 - Supply, Refrigerant Pressure Sensor Grey/Black 0.5
9 - Signal, Refrigerant Pressure Sensor Blue/Black 0.5
10 - ------------- ----
11 - ------------- ----
12 - ------------- ----
13 - ------------- ----
14 - Signal, Electric Auxiliary Heater White 0.35
15 - Signal, AC Compressor, Pulse Width Modulated Black/Green 0.75
16 - Signal, Water Valve Left Yellow/Brown 0.5
17 - Signal, Water Valve Right Yellow/Purple 0.5
18 - Signal, Auxiliary Water Pump Green 0.5
19 - Signal, Rear Window Defroster Grey/Black 0.35
20 - Signal, Washer Jets Heater Green/Black 0.5
21 - Signal, AC Compressor Control Valve White/Green 0.75
22 - Supply, Rear Compartment Potentiometer White/Green 0.5
23 - Signal, Rear Compartment Potentiometer White/Blue 0.5
24 - Signal, Ventilation Temperature Sensor Blue 0.5
25 - Ground, Control Panel Brown 0.5
26 - Ground, Rear Compartment Potentiometer White/Brown 0.5