UMNITZA - Final Review
#1
New Members
Thread Starter
Join Date: Dec 2012
Location: Rhode Island
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://5series.net/forums/images/icons/icon1.gif)
Ok so about a month ago I ordered MTECH front bumper lip and sideskirts. Took about a month to get here.. Some of you may have read my (Greyhound is Horrible) post.
This is a positive review for Umnitza. They've been catching alot of hell lately, even by me initially.. So I thought I'd give some good feedback as it's deserved in this order.
The only issue I had was with side skirts. The front part was about a 1/4" too short. It's not a big deal unless I point it out to someone, they would never notice.. Something that should def be corrected.. Im not the first to complain about that. But as far as everything else goes..
All parts were prepainted. and i must say I was skeptical at first but everything matches perfect. Even the PDC sensors look exact same color as the bumper they sit in.. I received the exact brackets that were on my stock bumper.
The holes were predrilled the correct size.
Fitment for the most part was good. I would say about 98% perfect. I dont blame Umnitza for this.. I blame my lack of knowledge. This is first time Ive ever done somethign liike this myself. I didn't shave the foam back as soem people said were nessacary also.. But Im nitpicking, theres nothing really noticable unless I point it out.. Hood gap is fine once I shimmed with washers.
I think that about sums it up. Aside from the 30 day wait to receive everything and the small sideskirt issue.. I am very satisfied with the way my car looks.
Installed the retractable plate as well. What a difference it all make compared to my stock ride.. I shouuld have a picture to post after this thread... Perhaps after I take a couple.. Though you all know what the Mtech kit looks like.
Alpine white car.. with black lip..
K see ya.
This is a positive review for Umnitza. They've been catching alot of hell lately, even by me initially.. So I thought I'd give some good feedback as it's deserved in this order.
The only issue I had was with side skirts. The front part was about a 1/4" too short. It's not a big deal unless I point it out to someone, they would never notice.. Something that should def be corrected.. Im not the first to complain about that. But as far as everything else goes..
All parts were prepainted. and i must say I was skeptical at first but everything matches perfect. Even the PDC sensors look exact same color as the bumper they sit in.. I received the exact brackets that were on my stock bumper.
The holes were predrilled the correct size.
Fitment for the most part was good. I would say about 98% perfect. I dont blame Umnitza for this.. I blame my lack of knowledge. This is first time Ive ever done somethign liike this myself. I didn't shave the foam back as soem people said were nessacary also.. But Im nitpicking, theres nothing really noticable unless I point it out.. Hood gap is fine once I shimmed with washers.
I think that about sums it up. Aside from the 30 day wait to receive everything and the small sideskirt issue.. I am very satisfied with the way my car looks.
Installed the retractable plate as well. What a difference it all make compared to my stock ride.. I shouuld have a picture to post after this thread... Perhaps after I take a couple.. Though you all know what the Mtech kit looks like.
Alpine white car.. with black lip..
K see ya.
#2
Members
Senior Members
Join Date: Sep 2008
Location: San Jose, Ca
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: E60
Model Year: 2005
![Default](https://5series.net/forums/images/icons/icon1.gif)
go take some pictures for us.....I don't want to read text, I want pictures. Just like porn, I want to see the real action, not read about it. hahahaha
#3
Members
Senior Members
Join Date: Apr 2012
Location: Concord, CA
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Alpine E60, '09 535i-Premium, Sport and Comfort Access PackageMods: Lux H8 V3 Angel Eyes, Weisslicht LED license plate lights, Interior LED lights, RPI Scoop, Matte Black Grills, Smoked LED side markers & side reflectors, 35% tint all around, and a 3
![Default](https://5series.net/forums/images/icons/icon1.gif)
+1
Like the old saying goes, this thread is worthless without pics.
Like the old saying goes, this thread is worthless without pics.
![Evil](https://5series.net/forums/images/smilies/imported/evil.gif)
#5
New Members
Thread Starter
Join Date: Dec 2012
Location: Rhode Island
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://5series.net/forums/images/icons/icon1.gif)
lol Here are a few. Hood gap isn't nearly as noticable as it may look in the pics. Shadow is casted quite strong taking the photos.
I placed washers under each of the 5 holes on bumper that you screw down to under hood.
![](http://i60.photobucket.com/albums/h31/image969/car_zps4bfb9328.jpg)
![](http://i60.photobucket.com/albums/h31/image969/car2_zps18a324d2.jpg)
I placed washers under each of the 5 holes on bumper that you screw down to under hood.
![](http://i60.photobucket.com/albums/h31/image969/car_zps4bfb9328.jpg)
![](http://i60.photobucket.com/albums/h31/image969/car2_zps18a324d2.jpg)
![](http://i60.photobucket.com/albums/h31/image969/car3_zps60f4a316.jpg)
#7
New Members
Thread Starter
Join Date: Dec 2012
Location: Rhode Island
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://5series.net/forums/images/icons/icon1.gif)
Thanks.. Sideskirts were actually pretty easy. Under the car there will be 1 5/16 size screw towards front and 2 towards back that are holding liner. then there are 8-10 size 27(i think) tork screws underneath that come right out.. then you just have to open both doors to be safe and pull the side of it off.. Pull hard.. will sound like you're breaking something but youre not. There are brackets that pop in and out..
Then there will be a couple of pieces on end you need to transfer to new side skirt.
clips for the 3 5/16 screws. and 2 litle brackets the snap to the side towards the back of the skirt.
About a half hour per side going slow so i didnt scratch anything.. Def throw a blanket out there if you dont have it on a lift and if you dont have a second person to help.
Then there will be a couple of pieces on end you need to transfer to new side skirt.
clips for the 3 5/16 screws. and 2 litle brackets the snap to the side towards the back of the skirt.
About a half hour per side going slow so i didnt scratch anything.. Def throw a blanket out there if you dont have it on a lift and if you dont have a second person to help.
Last edited by image969; 06-05-2014 at 10:44 AM.
#10
Former Vendor
![Default](https://5series.net/forums/images/icons/icon1.gif)
Ok so about a month ago I ordered MTECH front bumper lip and sideskirts. Took about a month to get here.. Some of you may have read my (Greyhound is Horrible) post.
This is a positive review for Umnitza. They've been catching alot of hell lately, even by me initially.. So I thought I'd give some good feedback as it's deserved in this order.
The only issue I had was with side skirts. The front part was about a 1/4" too short. It's not a big deal unless I point it out to someone, they would never notice.. Something that should def be corrected.. Im not the first to complain about that. But as far as everything else goes..
All parts were prepainted. and i must say I was skeptical at first but everything matches perfect. Even the PDC sensors look exact same color as the bumper they sit in.. I received the exact brackets that were on my stock bumper.
The holes were predrilled the correct size.
Fitment for the most part was good. I would say about 98% perfect. I dont blame Umnitza for this.. I blame my lack of knowledge. This is first time Ive ever done somethign liike this myself. I didn't shave the foam back as soem people said were nessacary also.. But Im nitpicking, theres nothing really noticable unless I point it out.. Hood gap is fine once I shimmed with washers.
I think that about sums it up. Aside from the 30 day wait to receive everything and the small sideskirt issue.. I am very satisfied with the way my car looks.
Installed the retractable plate as well. What a difference it all make compared to my stock ride.. I shouuld have a picture to post after this thread... Perhaps after I take a couple.. Though you all know what the Mtech kit looks like.
Alpine white car.. with black lip..
K see ya.
This is a positive review for Umnitza. They've been catching alot of hell lately, even by me initially.. So I thought I'd give some good feedback as it's deserved in this order.
The only issue I had was with side skirts. The front part was about a 1/4" too short. It's not a big deal unless I point it out to someone, they would never notice.. Something that should def be corrected.. Im not the first to complain about that. But as far as everything else goes..
All parts were prepainted. and i must say I was skeptical at first but everything matches perfect. Even the PDC sensors look exact same color as the bumper they sit in.. I received the exact brackets that were on my stock bumper.
The holes were predrilled the correct size.
Fitment for the most part was good. I would say about 98% perfect. I dont blame Umnitza for this.. I blame my lack of knowledge. This is first time Ive ever done somethign liike this myself. I didn't shave the foam back as soem people said were nessacary also.. But Im nitpicking, theres nothing really noticable unless I point it out.. Hood gap is fine once I shimmed with washers.
I think that about sums it up. Aside from the 30 day wait to receive everything and the small sideskirt issue.. I am very satisfied with the way my car looks.
Installed the retractable plate as well. What a difference it all make compared to my stock ride.. I shouuld have a picture to post after this thread... Perhaps after I take a couple.. Though you all know what the Mtech kit looks like.
Alpine white car.. with black lip..
K see ya.
The car looks great! And with your permission, we'll use some of the photos in the future?