TO ALL NEXTEL IDEN USERS
#11
Members
Thread Starter
Join Date: Jan 2005
Location: Miami, Fl
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Guys,
I have CIP ver. 15.2 on my 2004 525i. Follow these steps:
While inside with the car running, go to the Communications settings and set the Bluetooth communication active
Nextel I605
Go to the Bluetooth menu
Click on Link Devices, once the phone detects the BMW system
It will prompt you to enter a Pass key (1-16 digits)
Enter the number press OK
Now the IDRIVE will prompt you to enter the Pass key, make sure you enter the same number you entered on the phone, then click on Confirm Passkey
You will then see the phone listed on the IDRIVE, exit this menu and the phone will prompt you to accept the communication with the car
You are finished
I have CIP ver. 15.2 on my 2004 525i. Follow these steps:
While inside with the car running, go to the Communications settings and set the Bluetooth communication active
Nextel I605
Go to the Bluetooth menu
Click on Link Devices, once the phone detects the BMW system
It will prompt you to enter a Pass key (1-16 digits)
Enter the number press OK
Now the IDRIVE will prompt you to enter the Pass key, make sure you enter the same number you entered on the phone, then click on Confirm Passkey
You will then see the phone listed on the IDRIVE, exit this menu and the phone will prompt you to accept the communication with the car
You are finished
#12
Originally Posted by ponster' date='May 4 2005, 10:56 PM
Guys,
I have CIP ver. 15.2 on my 2004 525i. Follow these steps:
While inside with the car running, go to the Communications settings and set the Bluetooth communication active
Nextel I605
Go to the Bluetooth menu
Click on Link Devices, once the phone detects the BMW system
It will prompt you to enter a Pass key (1-16 digits)
Enter the number press OK
Now the IDRIVE will prompt you to enter the Pass key, make sure you enter the same number you entered on the phone, then click on Confirm Passkey
You will then see the phone listed on the IDRIVE, exit this menu and the phone will prompt you to accept the communication with the car
You are finished
I have CIP ver. 15.2 on my 2004 525i. Follow these steps:
While inside with the car running, go to the Communications settings and set the Bluetooth communication active
Nextel I605
Go to the Bluetooth menu
Click on Link Devices, once the phone detects the BMW system
It will prompt you to enter a Pass key (1-16 digits)
Enter the number press OK
Now the IDRIVE will prompt you to enter the Pass key, make sure you enter the same number you entered on the phone, then click on Confirm Passkey
You will then see the phone listed on the IDRIVE, exit this menu and the phone will prompt you to accept the communication with the car
You are finished
[snapback]124196[/snapback]
Thanks
Pablo
#13
bump...
I talked to Nextel and they said that the software on my phone is old and needs upgrading (2 day old phone) but they cant tell me which is the right software version or who carries it??? Service centeres dont yet have any software to upload...
Pablo
I talked to Nextel and they said that the software on my phone is old and needs upgrading (2 day old phone) but they cant tell me which is the right software version or who carries it??? Service centeres dont yet have any software to upload...
Pablo
#14
ponster... when you say it pares with the car, do you mean that it transmits the whole address book from the phone to the car and you can dial with voice commands or only that you can answer and make phone calls with the wheel buttons?
tnx
tnx
Thread
Thread Starter
Forum
Replies
Last Post
Trinity Autosport
Vendor Classifieds
20
09-22-2016 11:08 PM
timmay77
E61 Touring Discussion
7
09-24-2015 09:38 AM
timmay77
E61 Touring Discussion
2
09-23-2015 12:34 AM
Bank$hot530
E60, E61 Parts, Accessories and Mods
0
09-16-2015 01:28 PM