RPI Exhaust E60 M5 AND Non-M
#1
Former Vendor
Thread Starter
Join Date: Oct 2006
Location: Anaheim, CA
Posts: 19,460
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F13 M6
.:Trinity Autosport:. RPI Exhaust E60 M5 AND Non-M
Hi guys, thought Id make a new thread.
Manufactured from high quality T-304 stainless steel and offering exceptional performance and sound, the RPI GTS exhaust for the E60 M5 is about 30% quieter than its prior GT version with resonators in section 1. 100% made in the USA and tested on a dyno dynamics, you can expect a 10-17whp gain and a weight saving of about 60 lbs compared to the stock system. Need I say more? Unleash the sound of the F1 technology of your V10 with this complete bolt-on system.
**note: sections can be purchased individually as well, but must be installed with an adapter kit(s) with the OEM exhaust. Adapter kits can be provided.
RPI GTS Exhaust E60 M5: Retail $2999, $2909
-FREE SHIPPING within the US
-install available for local customers
**** For the non-Ms, we have not forgotten about you. A single side exhaust is specific for each model. Your stock exhaust will need to be cut after proper measurements are taken, and the RPI axle-back exhaust clamps right on utilizing the OEM hangers and points for easy installation. A rough estimate of 7-10 whp gain can be expected, dyno proven as well.
RPI GT 525/528/530: Retail $889, $844
RPI GT 545: Retail $895, $850
RPI GT 550: Retail $995, $9445
-FREE SHIPPING within the US
-install available for local customers
Please feel free to contact myself of Joe for any inquiries and/or orders.
Thank you!
https://www.trinityautosport.com/e60...895432559.html
Manufactured from high quality T-304 stainless steel and offering exceptional performance and sound, the RPI GTS exhaust for the E60 M5 is about 30% quieter than its prior GT version with resonators in section 1. 100% made in the USA and tested on a dyno dynamics, you can expect a 10-17whp gain and a weight saving of about 60 lbs compared to the stock system. Need I say more? Unleash the sound of the F1 technology of your V10 with this complete bolt-on system.
**note: sections can be purchased individually as well, but must be installed with an adapter kit(s) with the OEM exhaust. Adapter kits can be provided.
RPI GTS Exhaust E60 M5: Retail $2999, $2909
-FREE SHIPPING within the US
-install available for local customers
**** For the non-Ms, we have not forgotten about you. A single side exhaust is specific for each model. Your stock exhaust will need to be cut after proper measurements are taken, and the RPI axle-back exhaust clamps right on utilizing the OEM hangers and points for easy installation. A rough estimate of 7-10 whp gain can be expected, dyno proven as well.
RPI GT 525/528/530: Retail $889, $844
RPI GT 545: Retail $895, $850
RPI GT 550: Retail $995, $9445
-FREE SHIPPING within the US
-install available for local customers
Please feel free to contact myself of Joe for any inquiries and/or orders.
Thank you!
https://www.trinityautosport.com/e60...895432559.html
Last edited by info@trinityautosport; 07-26-2017 at 07:33 AM.
#2
Former Vendor
Thread Starter
Join Date: Oct 2006
Location: Anaheim, CA
Posts: 19,460
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F13 M6
#4
Former Vendor
Thread Starter
Join Date: Oct 2006
Location: Anaheim, CA
Posts: 19,460
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F13 M6
***LIMITED AMOUNT: RPI section 1 ST for E60 M5, section 1 with high flow cats!
Please contact myself or Joe for any inquiries and orders!
Please contact myself or Joe for any inquiries and orders!
Last edited by info@trinityautosport; 01-14-2013 at 10:06 AM.
#5
Former Vendor
Thread Starter
Join Date: Oct 2006
Location: Anaheim, CA
Posts: 19,460
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F13 M6
#6
I posted this on the M5 board but haven't received a reply yet...
I'm confused....Can you clarify all the options and the differences between them?
I thought the options were:
1) GT section 1 (just straight pipes) Loudest option *
2) GTS Section 1 with resonators - more quiet option *
*Both option 1 & 2 have the same section 2 & section 3
what is the ST option?
I'm confused....Can you clarify all the options and the differences between them?
I thought the options were:
1) GT section 1 (just straight pipes) Loudest option *
2) GTS Section 1 with resonators - more quiet option *
*Both option 1 & 2 have the same section 2 & section 3
what is the ST option?
#7
Former Vendor
Thread Starter
Join Date: Oct 2006
Location: Anaheim, CA
Posts: 19,460
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F13 M6
I posted this on the M5 board but haven't received a reply yet...
I'm confused....Can you clarify all the options and the differences between them?
I thought the options were:
1) GT section 1 (just straight pipes) Loudest option *
2) GTS Section 1 with resonators - more quiet option *
*Both option 1 & 2 have the same section 2 & section 3
what is the ST option?
I'm confused....Can you clarify all the options and the differences between them?
I thought the options were:
1) GT section 1 (just straight pipes) Loudest option *
2) GTS Section 1 with resonators - more quiet option *
*Both option 1 & 2 have the same section 2 & section 3
what is the ST option?
#8
Just to clarify, can you comment on the difference between the high flow cats (ST) and the resonated (GTS). Pros/Con's of each, which one is louder, which one flows better, etc.
Thanks!